Browsing Mohd Afendi Bin Rojan, Associated Professor Dr. by Subject "Bond thickness"

Now showing items 1-6 of 6

    • Strength and fracture characteristics of shear adhesive dissimilar joint 

      Mohd Afendi; Imaduddin Helmi, Wan Nordin; Ruslizam, Daud; Teramoto, Tokuo (Universiti Malaysia Perlis (UniMAP)Pusat Pengajian Kejuruteraan Mekatronik, 2012-02-27)
      In this study, the effect of bond thickness upon the shear strength of epoxy adhesively bonded joint with dissimilar adherends is addressed. The bond thickness, t between the adherends is controlled to be ranged from ...

    • Strength of ductile adhesive butt joint bonded with dissimilar adherents: effect of surface roughness 

      Nurul Atikah; Mohd Afendi, Rojan, Dr.; Siti Hirmaliza; Mohd Shukry, Abdul Majid, Dr.; Nurul Amira; Mazlee, Mohd Noor, Dr. (Trans Tech Publications, 2014-06)
      The purpose of this project is to study the influence of the macroscopic state of surface roughness of the dissimilar adherent on the strength of adhesive joint. In this project, several types of sandpaper were used to ...

    • Strength of three-point-bending ductile adhesive joint with dissimilar adherent 

      Siti Nurhashima; Mohd Afendi, Rojan, Dr.; Nasrul Amri, Mohd Amin, Dr.; Mohd Shukry, Abdul Majid, Dr.; M.Taufik (Trans Tech Publications, 2014-06)
      In this study, an experimental investigation was conducted in order to determine the effect of different adhesive thickness (i.e., 0.1, 0.5, 0.7 and 1 mm) on strength of ductile adhesive joint. The study scope covers both ...

    • Strength prediction and reliability of brittle epoxy adhesively bonded dissimilar joint 

      Mohd Afendi, Rojan, Dr.; Mohd Shukry, Abdul Majid, Dr.; Ruslizam, Daud, Dr.; Abdul Ghaffar, Abdul Rahman, Dr.; Teramoto, Tokuo (Elsevier Ltd, 2013)
      This paper deals with strength and failure prediction as well as reliability issues of adhesive joints of brittle epoxy bonding of two dissimilar adherends. Effects of bond thickness and scarf angle upon the strength of ...

    • Strength prediction of epoxy adhesively bonded scarf joints of dissimilar adherends 

      Mohd Afendi; Teramoto, Tokuo; Hairul, Bakri (Elsevier Ltd, 2011-09)
      In this study, strength of epoxy adhesively bonded scarf joints of dissimilar adherends, namely SUS304 stainless steel and YH75 aluminum alloy is examined on several scarf angles and various bond thicknesses under uniaxial ...

    • Study on strength of V-shaped epoxy adhesive joint 

      Mohd Afendi; Mohd Hafis, Sulaiman; Ishak, Ibrahim; Nakajima, Toru; Maeda, Masashi; Teramoto, Tokuo (Universiti Malaysia Perlis (UniMAP)Pusat Pengajian Kejuruteraan Mekatronik, 2012-02-27)
      This paper deals with strength and failure prediction of V-shaped epoxy adhesive joint. The effect of scarf angle and bond thickness upon the joint strength is investigated by tensile test. A simple failure criterion ...