Mohd Hafiz Fazalul Rahiman, Associate Professor Ir.Dr.: Recent submissions
Now showing items 21-40 of 69
-
Modelling ultrasonic sensor for gas bubble profiles characterization of chemical column
(Elsevier B.V., 2013)In this paper, we present a modelling and experimental work to characterize gas bubble profiles in chemical column using a pair of ultrasonic sensor. The gas bubble profiles from 2.90 mm to 7.50 mm diameter are of interest ... -
Ultrasonic tomography imaging for liquid-gas flow measurement
(International Frequency Sensor Association (IFSA), 2013)This research was carried out to measure two-phase liquid - gas flow regime by using a dual functionality ultrasonic transducer. Comparing to the common separated transmitter-receiver ultrasonic pairs transducer, the dual ... -
Design consideration for front-end system in ultrasonic tomography
(Penerbit UTM Press, 2013)The hardware development of the ultrasonic tomography comprises three main parts; the sensor unit, electronic measurement circuits combined with a data acquisition system and finally the display unit. The research done is ... -
Optical tomography: Image improvement using mixed projection of parallel and fan beam modes
(Elsevier Ltd, 2013-07)Mixed parallel and fan beam projection is a technique used to increase the quality images. This research focuses on enhancing the image quality in optical tomography. Image quality can be defined by measuring the Peak ... -
Optical tomography hardware development for solid gas measurement using mixed projection
(Elsevier Ltd, 2013-10)The ability to implement fan beam projection in parallel view in an optical tomography setup is one of the novelties of this research. This design involves a sensor jig specifically designed for parallel applications that ... -
A study of a two phases medium in pipe vessel using gaussian filter method and k-NN classifier
(IOS Press, 2013-07-03)In this paper we present the existence and uniqueness of solutions to the stochastic problem to determine two phase level of gas and water in the industrial pipe line. In order to distinguish the level phases in a vessel ... -
Study on wireless sensor based industrial tomography systems
(International Frequency Sensor Association Publishing (IFSA), 2013)Wireless sensor technologies are promising in the field of industrial tomography system, to visualize the cross-sectional images of an industrial flow process. The aim of the paper is to review the technical and scientific ... -
Study of the effect of brightness after penetration of light from a lens
(Penerbit UTM Press, 2013)There are many types of component that are able to produce light and the light is produced based on the angle and wavelength of the lens. Light penetration depends on the type of material used. The tests are done using ... -
A review of tomography system
(Penerbit UTM Press, 2013)Tomography system is a method that being used to reconstruct a cross sectional image in vessel or pipeline. This method is widely used in medical and industrial fields. The aim of this paper is to provide an overview of ... -
Electrical resistance tomography: a review of the application of conducting vessel walls
(Elsevier, 2014-03)Despite decades of research, the study on tomography continues to be a subject of great scientific interest. Amongst all the kinds of tomography available, electrical resistance tomography (ERT) has been chosen as the field ... -
Ultrasonic tomography - image reconstruction algorithms
(International Journal of Innovative Computing, Information and Control (IJICIC), 2012-01)This paper focuses on image reconstruction algorithms for use in ultrasonic tomography. There are three types of algorithms namely Linear Back Projection, Hybrid Reconstruction and Hybrid Binary Reconstruction that are of ... -
Multiphase ultrasonic tomography technique for homogeneous and Non-homogeneuos media identification
(Intel Tech Sdn. Bhd./Pac Tech Sdn. Bhd./Universiti Sains Malaysia (USM), 2009)Multiphase flow characterization is an important task for monitoring, measuring or controlling industrial processes. This can be done by means of process tomography. The use of tomographic techniques has been used within ... -
Novel adjacent criterion method for improving ultrasonic imaging spatial resolution
(Institute of Electrical and Electronics Engineers (IEEE), 2012)In this letter, we present a novel approach for improving spatial resolution in ultrasonic tomography. The proposed technique modifies a Back-projection (BP) algorithm in reconstructing tomography images. We used 32-ultrasonic ... -
Tomographic reconstruction of a multi-attenuation phantom by means of ultrasonic method
(Springer Science+Business Media B.V., 2012)This paper presents a work on tomography reconstruction of a multi-attenuation phantom by means of ultrasonic method. A transmission-mode approach has been used for the sensing modality. The reconstruction has been conducted ... -
Segmented capacitance tomography electrodes: A design and experimental verifications
(Institute of Electrical and Electronics Engineers (IEEE), 2012-05)A segmented capacitance tomography system for real-time imaging of multiphase flows is developed and presented in this work. The earlier research shows that the electrical tomography (ECT) system is applicable in flow ... -
An introduction of two differential excitation potentials technique in electrical capacitance tomography
(Elsevier B.V., 2012-06)The investigation of this work is to analyse the sensitivity distributions using single and two differential excitation potentials techniques in order to improve the situation of: (1) non-uniform sensitivity distribution; ... -
Sensor modeling for portable Electrical Capacitance Tomography system using simulation by COMSOL Multiphysics
(Innovative Computing, Information and Control (ICIC) International, 2012-10)This work presents the development process for modeling a 16-segmented portable ECT (Electrical Capacitance Tomography) sensor (using FEM software package COMSOL Multiphysics). The physical sensors are 3D dimensional but ... -
Advancements in Transmitters and Sensors for Biological Tissue Imaging in Magnetic Induction Tomography
(MDPI AG, 2012-05-29)Magnetic Induction Tomography (MIT), which is also known as Electromagnetic Tomography (EMT) or Mutual Inductance Tomography, is among the imaging modalities of interest to many researchers around the world. This noninvasive ... -
Development of parallel and fan-shaped beam mixed-projection optical tomography
(International Frequency Sensor Association Publishing (IFSA), 2012-05)Parallel and fan shaped beam are two common projections that had been used widely in optical tomography system. These projections never have been merged before in the process of tomography area. In this paper, some ... -
The hardware design technique for ultrasonic process tomography system
(International Frequency Sensor Association Publishing (IFSA), 2012-06)This paper describes a work carried out to design and development an ultrasonic process tomography system. The hardware design technique is of interest of this paper. A number of 32-ultrasonic transducers have been ...