Shamsul Baharin Jamaludin, Prof. Dr.
Browse by
This page provides access to research works by Prof. Dr. Shamsul Baharin Jamaludin, currently a Professor of School of Materials Engineering, Universiti Malaysia Perlis (UniMAP).
News
Skills and Expertise: Material Characterization, Materials, Mechanical Properties, Mechanical Behavior of Materials, Microstructure, Material Characteristics, Materials Processing, Advanced Materials, Mechanical Testing, Materials Testing, Metals, Biomaterials, Extraction, Heat Treatment, Metallurgical Engineering, Materials Engineering, Composites, Coating, Corrosion, Tensile Testing, Welding, Sintering, Concrete, Powders, Alloys, Bioactivity, Casting, EDX, Thermal Properties, Industry, Steel, Composite Material, Fabrication, Recycling, Lithium Ion Batteries, Solidification, Particle Size Analysis, Microwave, Physical Properties, Biocompatible Materials, Colloids, Compressive Strength, Leaching, Aluminum Alloys, Aluminium, Biomedical Devices, Graphite, Injection Molding, Tensile Strength, Materials Characterization, Soldering, Powder Metallurgy, Foundry, Magnesium, Alumina, Metal Matrix Composites, Magnesium Alloys, Hardness Tests and Physical Metallurgy.
Recent Submissions
-
Aluminium - Polymer abs product
(Universiti Malaysia Perlis (UniMAP), 2012)Material used for aluminium product usually made of aluminium scrap. Currently, the price of aluminium scrap is increase. It is necessary to minimize the cost of production by reducing the weight of the aluminium product ... -
Effect of palm slag filler size on the mechanical and wear properties of brake pad composites
(American Scientific Publishers, 2013-01)Particle size of filler and other material that involved in brake pad composites are expected to be able to strongly influence the wear properties and performance. Palm slag as a filler in brake pad was investigated in ... -
A brief review of layered rock salt cathode materials for lithium ion batteries
(Trans Tech Publications, 2013)Nowadays, many researchers have been studying on the layered rock salt-type structure as cathode materials for the lithium ion batteries. LiCoO2 is the most commonly used cathode material but Co is costly and toxic. Thus, ... -
Synthesis and characterization of pure magnesium/bio-glass composite
(Trans Tech Publications, 2013)In this study, bio-glass 45S5 powder was added to pure magnesium powder to produce the magnesium/bio-glass composite by powder metallurgy method. The composite was synthesized based on 5 wt. %, 10 wt. % and 15 wt. % of ... -
Oxide semiconductors for solar to chemical energy conversion: nanotechnology approach
(Institute for Ionics, 2014)The present work considers the application of oxide semiconductors in the conversion of solar energy into the chemical energy required for water purification (removal of microbial cells and toxic organic compounds from ... -
Structural & Magnetic Characterizations of NiLiZn Nanoferrites Synthesized by Co-precipitation Method
(Chinese Society of Metals, 2011)Synthesis of Ni 0.5Li xZn (0.5-x)Fe 2O 4 nanoparticles with x=0, 0.1, 0.2, 0.3, 0.4 and 0.5 were realized via co-precipitation method. X-ray diffraction (XRD) and vibrating sample magnetometer (VSM) measurements were ... -
Comparative study on thermal, compressive, and wear properties of palm slag brake pad composite with other fillers
(Trans Tech Publications, 2011)The attractive performance-to-cost ratio associated with the incorporation of waste material in composite formulations used to produce brake pads has stimulated the idea of exploring the possible incorporation of additional ... -
The influence of particle sizes and compaction pressure on surface hardness of aluminum composite fabricated via powder metallurgy
(INSInet Publications, 2011)A statistical analysis was used to anticipate the influence of particles sizes and compaction pressure on surface hardness of aluminum composites after compacted in a rigid die under an uniaxial compaction. Al-20 wt.% slag ... -
The development of cement composites reinforced coconut fiber with fly ash addition: mechanical properties and fracture behaviour
(Trans Tech Publications, 2013)This research paper presents a study on the development of cement composites reinforced coconut fiber with fly ash addition. Various content of coconut fiber (3 wt. %, 6 wt. %, 9 wt. %, 12 wt. % and 15 wt. %) was added to ... -
Effects of fly ash addition on compressive strength and flexural strength of foamed cement composites
(Trans Tech Publications, 2013)In this study, the mixing of polystyrene (PS) beads and fly ash as a sand replacement material in foamed cement composites (FCC) has been investigated. Specifically, the mechanical properties such as compressive strength ... -
Effect of heating rate on microstructure and properties of the iron-chromium reinforced with alumina particle produced via microwave sintering
(Praise Worthy Prize, 2013)The application of microwave sintering to metallic materials offers better mechanical properties over conventional sintering method. In this paper, the effect of heating rate on the microstructure and properties of the ... -
Fabrication and characterisation of powder metallurgy Fe-Cr Matrix composites reinforced with Al2O3
(Trans Tech Publications, 2013)Sintered powder metallurgy Fe based composites with advanced mechanical properties have been proposed as substitutes for more expensive cemented carbide and wrought alloys in many applications, especially as inexpensive ... -
Composite cement reinforced coconut fiber: physical and mechanical properties and fracture behavior
(INSInet Publications, 2011)This research paper reports the effect of natural fiber content on the physical and mechanical properties as well as fracture behavior of composite cement reinforced with coconut fiber. The mix design was based on 1:1 for ... -
Mechanical properties and morphology of palm slag, calcium carbonate and dolomite filler in brake pad composites
(Trans Tech Publications, 2013)The development of asbestos free brake pad composites using different fillers was investigated with a intention to substitute asbestos which is known hazardous and carcinogenic. Mechanical and morphology studies were made ... -
Joining of dissimilar 6063 aluminium alloy-316L stainless steel by spot welding: tensile shear strength and heat treatment
(Trans Tech Publications, 2013)Tensile shear strength and ageing treatment of dissimilar 6063 aluminum alloy-316L stainless steel joint fabricated by spot welding were investigated. The results showed that tensile shear strength increased with the ... -
Assessment of physical and mechanical properties of cement panel influenced by treated and untreated coconut fiber addition
(Elsevier BV, 2011)This project was conducted to produce a cement panel with the addition of treated and untreated coconut fiber in cement panel. Coconut fiber was added to replace coarse aggregate (sand) in this cement panel. In this project, ... -
Dry sliding wear and compressive strength of Fe-Cr matrix composite with and without Al2O3 reinforcement
(IEEE Conference Publications, 2011)Fe-Cr matrix composites reinforced with Al2O3 particulates fabricated by powder metallurgy (PM) method offer potential for cheaper wear resistance materials and high temperature application. The influence of Al2O3 amount ... -
Sand replacement materials (SRM) in sustainable cement composites; A concise review
(Trans Tech Publications, 2013)This paper presents a short review of research works on the development of sustainable cementitious matrix composites with addition of potential mineral wastes as sand replacement materials. The study emphasizes on the ... -
Sintering effects on mechanical properties of Co-HA composite prepared by modified electroless deposition.
(Trans Tech Publications, 2014)Co-HA composite produced using electroless deposition without conventional sensitization and activation treatment was studied with varying sintering temperature (1100°C, 1200°C and 1250°C). The particles size, bulk density, ... -
Effect of different nickel content on the mechanical properties of hydroxyapatite-ni composites from coated powders
(Trans Tech Publications, 2014)HA-Ni composites were fabricated by uniaxial pressing from coated powders, in which HA particles were successfully coated with nickel precursor by the electroless deposition method. The compacted powders sintered at ...