Show simple item record

dc.contributor.authorAeslina, Abdul Kadir
dc.contributor.authorNoor Amira, Sarani
dc.contributor.authorMohd Mustafa Al Bakri, Abdullah
dc.contributor.authorPerju, M C
dc.contributor.authorSandu, Andrei Victor
dc.contributorDepartment of Water and Environmental Engineering, Faculty of Civil and Environmental Engineering (UTHM)en_US
dc.contributorCenter of Excellence Geopolymer and Green Technology (CEGeoGTech), School of Materials Engineering, Universiti Malaysia Perlis (UniMAP)en_US
dc.contributorFaculty of Engineering Technology, Universiti Malaysia Perlis (UniMAP)en_US
dc.contributorFaculty of Materials Science and Engineering, Gheorghe Asachi Technical University of Iasien_US
dc.date2022
dc.date.accessioned2022-03-07T03:02:41Z
dc.date.available2022-03-07T03:02:41Z
dc.date.issued2017-06
dc.identifier.citationIOP Conference Services: Material Sciences Engineering, vol.209, 2017, 10 pagesen_US
dc.identifier.urihttp://dspace.unimap.edu.my:80/xmlui/handle/123456789/74580
dc.descriptionLink to publisher's homepage at https://iopscience.iop.org/en_US
dc.description.abstractPalm oil is one of the major agricultural industries in Malaysia. Due to the poor management system, the discarded palm oil waste has always been linked to the environment issues. During processing of palm oil, a considerable amount of solid waste by-products in the form of fibres, shells, empty fruit bunches and fly ashes are produce rapidly. Therefore, this study was conducted to incorporate 1%, 5% and 10% of palm oil waste into fired clay brick. Samples of brick were fired at 1050°C temperature with heating rates of 1°C/min. Manufactured bricks were tested with physical and mechanical properties including firing shrinkage, dry density, water absorption and compressive strength. The results demonstrated that the replacement of 1% up to 5% of palm oil waste had improved several properties, although, a decrease of performance in certain aspects has also been observed. As a result, palm oil waste can be utilized in an environmentally safe way into fired clay brick thus providing adequate properties of fired clay brick.en_US
dc.language.isoenen_US
dc.publisherIOP Publishing Ltden_US
dc.subject.otherPalm oil wasteen_US
dc.subject.otherFired clay bricksen_US
dc.subject.otherBricksen_US
dc.titleStudy on fired clay bricks by replacing clay with palm oil waste: effects on physical and mechanical propertiesen_US
dc.typeArticleen_US
dc.identifier.urlhttps://doi.org/10.1088/1757-899x/209/1/012037
dc.contributor.urlaeslina@uthm.edu.myen_US
dc.contributor.urlnramira1987@gmail.comen_US


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record