dc.creator | Nik Noor Zilawati, Nik Ab Rahman | |
dc.date | 2018 | |
dc.date.accessioned | 2022-11-08T03:09:00Z | |
dc.date.available | 2022-11-08T03:09:00Z | |
dc.identifier.uri | http://dspace.unimap.edu.my:80/xmlui/handle/123456789/76739 | |
dc.description | Master of Science in Manufacturing Systems Engineering | en_US |
dc.description.abstract | The objective of this research is to demonstrate the use of Lean Six Sigma methodology
in a reduce high disposal scrap in hand lay-up process. Moreover, the goal is to develop
working solutions for the target company to reduce the rework time through minimize
the number of FOD defect. The theoretical background is achieved through exploring the
literature of Lean and Six sigma. The fundamental of the composite material and
composite fabrication method are studied due to this project conducted at the Aerospace
Composite Malaysia Company. The FOD defect problem suggested by the target
company, by following the Lean and Six Sigma improvement process DMAIC and by
analysing the process data from the target company. The focus of this research is in
demonstrating how to use Lean and Six Sigma improvement process DMAIC in practice.
In order to validate the manufacturing system’s current state, improvement potential and
solutions, statistical tools such as Pareto chart and histogram were used. To ensure that
all the decisions were as heavily based on actual data as possible, the actual data had been
analysed through cause and effect. As a result of this study, some designs have been done
using tools. As a result of this research, a set of solutions were developed by poka yoke
tool.. These quality technique are selected and applied to minimize in high disposal scrap. | en_US |
dc.language.iso | en | en_US |
dc.publisher | Universiti Malaysia Perlis (UniMAP) | en_US |
dc.rights | Universiti Malaysia Perlis (UniMAP) | en_US |
dc.subject | Foreign object debris (Aeronautics) | en_US |
dc.subject | Six sigma (Quality control standard) | en_US |
dc.title | Poka yoke for solving high disposal scrap problem at hand lay-up process at aerospace composite Malaysia | en_US |
dc.type | Dissertation | en_US |
dc.contributor.advisor | Muhammad Iqbal, Hussain, Dr. | |
dc.publisher.department | School of Manufacturing Engineering | en_US |