UniMAP Library Digital Repository: Recent submissions
Now showing items 441-460 of 80269
-
Effect of scan rate on the corrosion performance of Sn-9Zn solder
(Universiti Malaysia Perlis (UniMAP), 2017-06)The corrosion behaviour of Sn-9Zn solders and the effect of corrosion properties of Sn-9Zn solders in sodium chloride (NaCl) solution were studied in open circuit potential and polarized conditions. The corrosion test was ... -
Effect of Potentiodynamic polerization scan rate on the corrosion performance of SN-0.7CU solder in salt solution
(Universiti Malaysia Perlis (UniMAP), 2017-06)To investigate corrosion properties of Sn-0.7Cu solders at different scan rate in 3.5 wt% NaCl. To evaluate microstructure, elemental and phase evolution of Sn-0.7Cu solder after NaCl exposure. To study the corrosion ... -
The incorporation of Epoxidized Natural Rubber (ENR) into Styrene-butadiene Rubber (SBR)/Polybutadiene Rubber (BR) blends
(Universiti Malaysia Perlis (UniMAP), 2017-06)In this study, the ternary rubber blends of epoxidized natural rubber (ENR), styrene butadiene rubber (SBR) and butadiene rubber (BR) are blended with eight different formulations to observe the effects of the ternary blend ... -
Preparation and characterization of cassava starch foams: effect of foaming temperature
(Universiti Malaysia Perlis (UniMAP), 2017-06)This research was conducted to study the properties and characterization of cassava starch foam. The cassava starch foam were prepare by mixing the ingredient of desired formulation consists two variables such as the amount ... -
Studies on the effect of waste plastic on the reduction with iron ore at high temperature
(Universiti Malaysia Perlis (UniMAP), 2017-04)This work investigated the effect of waste plastic (low density polyethylene (LDPE)) on the reduction with iron ore at high temperature. The composite pellets of different compositions were formed from the mixtures of iron ... -
Effects of zinc addition on microstructure and properties of aluminum based alloys fabricated by sand casting process
(Universiti Malaysia Perlis (UniMAP), 2017-04)Al-Zn alloys were prepared by using sand casting method. The casting process was carried out by several stages that are the preparation of pattern, making of core box, sand mold, melting of raw materials and pouring. The ... -
Flexural strength and crack propagation of porous clay-precipitated calcium carbonate
(Universiti Malaysia Perlis (UniMAP), 2017-06)Porous clay-precipitated calcium carbonate were prepared via polymeric sponge replication method using precipitated calcium carbonate (PCC) and red clay as raw materials. Different compositions of precipitated calcium ... -
Heat extraction of fish oil from Patin catfish (Pangasius Hypophthalmus) and its oil quality analysis
(Universiti Malaysia Perlis (UniMAP), 2018-12)This research is to study the oil quality of patin catfish, Pangasius Hypophthalmus fish oil by using conventional extraction technique. The conventional extraction technique that being used in this research is green ... -
Modeling the relationship of foam density and pore content of a closed cell epoxy foam
(Universiti Malaysia Perlis (UniMAP), 2017-06) -
Kumpulan pekerjaan dan tahap kemahiran graduan ILKAP MAFI peringkat sijil/ tahap 3 tahun 2019
(Kementerian Pengajian Tinggi (KPT), Malaysia, 2020)• 42% graduan sijil/tahap 3 bekerja dalam kumpulan separuh mahir. • 34.3% graduan bekerja dalam kumpulan berkemahiran rendah dan 23.7% adalah pekerja mahir. -
Sektor pekerjaan graduan ILKAP MAFI peringkat sijil/tahap 3 tahun 2019
(Kementerian Pengajian Tinggi (KPT), Malaysia, 2020) -
Taraf pekerjaan graduan ILKAP MAFI peringkat sijil/tahap 3 mengikut jantina tahun 2019
(Kementerian Pengajian Tinggi (KPT), Malaysia, 2020)• 56.8% merupakan pekerja swasta (termasuk NGO). • 18.1% menceburi bidang keusahawanan (12.8% bekerja sendiri, 4.5% menjadi majikan dan 0.8% freelance). • 15.7% bekerja dengan keluarga. -
Pendapatan bulanan graduan ILKAP MAFI peringkat DKM Tahap 4 mengikut jantina tahun 2019
(Kementerian Pengajian Tinggi (KPT), Malaysia, 2020)• 59.7% graduan DKM Tahap 4 memperoleh pendapatan bulanan RM1,001 – RM1,500, diikuti graduan dalam kumpulan pendapatan RM1,000 dan ke bawah (25.8%). • Graduan lelaki (57.1%) dan perempuan (63%) mencatatkan peratus ... -
Kumpulan pekerjaan dan tahap kemahiran graduan ILKAP MAFI peringkat DKM Tahap 4 tahun 2019
(Kementerian Pengajian Tinggi (KPT), Malaysia, 2020)• 55.1% graduan DKM Tahap 4 bekerja sebagai pekerja separuh mahir, diikuti 26.5% adalah pekerja berkemahiran rendah. • 18.4% pula adalah pekerja mahir. -
Sektor pekerjaan graduan ILKAP MAFI peringkat DKM Tahap 4 tahun 2019
(Kementerian Pengajian Tinggi (KPT), Malaysia, 2020)• 91.7% graduan DKM Tahap 4 bekerja di sektor swasta (swasta tempatan dan NGO). • 8.4% bekerja di sektor kerajaan (termasuk badan berkanun). -
Effect of Pm element doping on thermoelectric Ca₁-𝑥Pm𝑥MnO₃ where X=0%, 0.083%, 0.167%
(Universiti Malaysia Perlis (UniMAP), 2017-05)The structure of CaMnO₃ is the orthorhombic perovskite has been studied at range of temperature 300K to 1000K. It shows that the thermoelectric properties of CaMnO3₃ is semiconductor. In this research, theoretical study ... -
A study on cobalt reduction onto HA by electroless plating
(Universiti Malaysia Perlis (UniMAP), 2017-04)Main objective of this study is to study the reduction of cobalt onto hydroxyapatite. In this reduction process, electroless plating technique was used where the hydroxyapatite powder was inserted into the solution of ... -
Density functional theory studies on thermoelectric properties of d element Hf doping on a site of CaMnO₃
(Universiti Malaysia Perlis (UniMAP), 2017-06)Effect of dopant on thermoelectric properties of CaMnO₃ was investigated. The thermoelectric properties for compound CaMnO₃ where doped with Hafnium was calculated by using Density Functional Theory (DFT) in Quantum ESPRESSO ... -
Effects of chemical treatment on wood fiber reinforced recycled Polypropylene composites
(Universiti Malaysia Perlis (UniMAP), 2017-06)The surface of wood fiber (WF) used as reinforcement in recycled polypropylene/wood fiber (rPP/WF) composites was modified by silane coupling agent. The effect of filler loading and silane as coupling agent on mechanical, ... -
Studies on the physicochemical and mechanochemical properties of raw and thermally treated dolomite for adsorption application
(Universiti Malaysia Perlis (UniMAP), 2017-04)Dolomite obtained from Chuping, Perlis quarry was mechanically activated at different parameters of planetary milling (miling time and rotational speed of milling) and was thermally treated at temperature from 700-900 °C. ...