International Journal of Nanoelectronics and Materials (IJNeaM): Recent submissions
Now showing items 61-80 of 151
-
Technique to enhance the bandwidth of a very thin Artificial Magnetic Condutor (AMC)
(Universiti Malaysia Perlis (UniMAP), 2020-05)This paper introduces a technique to enhance the bandwidth of the Artificial Magnetic Conductor (AMC). A multilayer patch type of Frequency Selective Surface (FSS) is stacked on the AMC structure, to increase the thickness ... -
Synthesis of polyaniline for water remediation and evaluating its feasibility to be reused as electrical conductor
(Universiti Malaysia Perlis (UniMAP), 2020-05)Adsorption is an effective process for humic acid removal; however, disposing the spent adsorbents creates secondary waste to the environment. Hence, this study aims to investigate the feasibility of using polyaniline ... -
Evaluation of mechanical properties on Vulcanized SMRCV-60 and ENR-25 of flexible-rigid body vibration isolator
(Universiti Malaysia Perlis (UniMAP), 2020-05)This paper presents the evaluation of tensile test results on mechanical properties of local natural rubber called the standard Malaysian rubber constant viscosity-60 and the epoxidized natural rubber 25% with different ... -
Effect of Sodium Alginate on the properties of calcium phosphate for bone implant application
(Universiti Malaysia Perlis (UniMAP), 2020-05)Calcium (CaP) is a bioceramic material which is limited in mechanical strength. Due to the limitation, Sodium Alginate (SA) was reinforced in CaP matrix composite with a different ratio of CaP/SA weight percentage (100/0, ... -
Effect of Al2o3 dispersion on enthalpy and thermal stability of ternary nitrate eutectic salt
(Universiti Malaysia Perlis (UniMAP), 2020-05)The system efficiency of concentrated solar power (CSP) was determined by using the working temperature of heat transfer fluid (HTF). Initially, organic HTFs were used for this purpose, which had a maximum operating ... -
Effect of carbon supports on oxygen reduction reaction of iron/cobalt electrocatalyst
(Universiti Malaysia Perlis (UniMAP), 2020-05)Dual metal FeCo has great potential as Pt-free catalyst in various applications, such as cathodic catalyst for fuel cells, in order to reduce the cost significantly and make fuel cell commercialization, viable. In this ... -
Driving monitoring system application with stretchable conductive inks: A review
(Universiti Malaysia Perlis (UniMAP), 2020-05)Nowadays the automotive industry is moving towards developing system connected vehicle parameters which can monitor the driver’s behaviour before driving. Most drivers lose focus and are emotionally distracted while driving ... -
Diffusion mechanism of silver particles in polymer binder for die attach interconnect technology
(Universiti Malaysia Perlis (UniMAP), 2020-05)Sintered Ag has gained strong interest as an important alternative material for interconnect technology in wide bandgap (WBG) semiconductor industries specifically for high thermal dissipations and high-speed applications. ... -
Characterization of biomass-reinforced biopolyol-based polyurethane foams
(Universiti Malaysia Perlis (UniMAP), 2020-05)In this study, polymer composites comprised of polyurethane (PU) foam and two kinds of biomass (coco peat and sphagnum) were prepared. PU industry heavily depends on the petroleum industry. Coco peat and sphagnum are ... -
Computed torque and velocity feedback control of cooperative manipulators handling a flexible beam
(Universiti Malaysia Perlis (UniMAP), 2020-05)Handling a flexible object is more complicated than a rigid one since it involves the vibration of the object. Since vibration is known to lead to disturbance, discomfort, damage, and destruction; it needs to be suppressed. ... -
Doping of Erbium(III) Oxide Nanoparticles–Polymer Interfaces in biodegradable inorganic solid polymer electrolytes for enhanced ionic conductivity
(Universiti Malaysia Perlis (UniMAP), 2020-05)The severity of the environmental issue, caused by the heavy consumption of fossil fuel encourages the development of biodegradable energy storage devices. Electrolyte, which provides charge carriers, is one of the basic ... -
Development of ultrasonic pulsation wire electrical discharge turning device for micro/nano medical part manufacturing
(Universiti Malaysia Perlis (UniMAP), 2020-05)Micro/Nano manufacturing has re-engineered the medical devices technology to component miniaturization. Despite of numerous technical challenges, tremendous development of micro/nano medical devices continue to grow. Wire ... -
Analysis of particles size distribution on the agglomeration and shrinkage of Alumina-Zirconia compacts
(Universiti Malaysia Perlis (UniMAP), 2020-05)The combination of Alumina and Zirconia has emerged as a promising ceramic structure for advance machine tool application. However, the particles of Alumina and Zirconia tend to agglomerate during mixture which affected ... -
Analysis on continuous wearable device for blood glucose detection using GSR sensor
(Universiti Malaysia Perlis (UniMAP), 2020-05)This paper presents the development of a non-invasive approach to detect the blood glucose level using a galvanic skin response (GSR) technique. Previously, GSR had been used in many applications such as lie detector and ... -
A Study on sound-absorbing acoustic panels from egg trays with recycled materials (Paper & Plastic)
(Universiti Malaysia Perlis (UniMAP), 2020-05)Noise is an unpleasant and unwanted sound for every human and animal. Noise can also interfere with one's communication and concentration. Nowadays, many sound absorber panels have been produced to overcome arising noise ... -
Analysis on sound absorber panel made of oil palm mesocarp fibre using Delany-Bazley and Johnson-Champoux-Allard models
(Universiti Malaysia Perlis (UniMAP), 2020-05)Oil palm mesocarp fibre is seen as one potential of reinforcement in polymers due to its high strength, low cost, environmentally friendly nature and availability. Recently, it has attracted greater interest from academia ... -
The effects of annealing temperature dependence on the doping of Titanium Dioxide (TiO2) and reduced graphene oxide (RGO) for perovskite solar cell application
(Universiti Malaysia Perlis (UniMAP), 2020-07)In the present study, reduced Graphene Oxide (rGO) was introduced to Titanium Dioxide (TiO2) as Electron Transport Layer (ETL) in Perovskite Solar Cell (PSC). TiO2 doped rGO (TiO2/rGO) was prepared by doping Titanium (IV) ... -
Effects of atmospheric pressure plasma jet treatment duration to the viability of Hela cells and microtissues
(Universiti Malaysia Perlis (UniMAP), 2020-07)Non-thermal atmospheric plasma jet (NTAPPJ) is believed to be effective in treating monolayer cells cultured in-vitro due to the oxidative stresses induced. However, it is controversial whether studying the impact of plasma ... -
Effect of discharge power on the properties of GaN thin films on AlN-(002) prepared by magnetron sputtering deposition
(Universiti Malaysia Perlis (UniMAP), 2020-07)Aluminum nitride (AlN) and gallium nitride (GaN) thin films were grown on silicon (Si) substrates using the conventional RF magnetron sputtering plasma deposition system. The growth rate of GaN increased as the deposition ... -
Structural and morphological properties of Cu1-xAlxO nanostructures prepared by sol-gel method
(Universiti Malaysia Perlis (UniMAP), 2020-07)In this study, the sol-gel process has been adopted for the synthesis of Cu1-xAlxO nanostructures (0≤ x ≤ 0.90, in steps of 0.10). The system revealed pure CuO phase with monoclinic structure. Al2O3 phase and copper oxide ...