Mazlee Mohd Noor, Assoc. Prof. Dr.: Recent submissions
Now showing items 21-39 of 39
-
E-nose for basal stem rot detection
(Universiti Malaysia Perlis (UniMAP)Pejabat Timbalan Naib Canselor (Penyelidikan dan Inovasi), 2009-07)An electronic nose is an intelligent device, able to mimic human olfaction functions and may be used for detection, recognition and classification of volatile compounds and odours. An e-nose consists of an array of ... -
Microstructural study and differential scanning alorimetry analysis at elevated temperatures of uperheated as-cast A357 alloy
(University of Malaya, 2009)The microstructure of superheated as-cast A357 alloy has been analysed to study the solidification structures of α-Al dendrites, eutectic Si particles and intermetallic compounds at different sections of the specimen. The ... -
Recycled Aluminium Composite Pulley
(Malaysian Invention & Design Society (MINDS), 2006-05-19)Recycle Aluminium Composite Pulley was an environmental-friendly pulley from innovative recycle aluminium composite materials. This pulley was fabricated by using recycled aluminium alloy from automotive component reinforced ... -
Enviro Composite Pulley
(Kementerian Pengajian Tinggi Malaysia (KPTM), 2005-09-30)Aluminium has been recycled since the days it was first commercially produced and today recycled aluminium accounts for one-third of global aluminium consumption worldwide. -
Metal Implant
(Malaysian Invention and Design Society (MINDS), 2006-05-19)This research product is cobalt-chromium metal implant produced by powder metallurgy technique. -
Cobalt Implant Composite (CIC)
(Ministry of Higher Education (MOHE), 2005-09-30)Cobalt implant composite (CIC) was fabricated in KUKUM by powder metallurgy technique. -
Comparison of dynamic mechanical properties of non-superheated and superheated A357 alloys
(Slovak Academy of Sciences, 2010-03-01)The influence of superheat treatment on the microstructure and dynamic mechanical properties of A357 alloys has been investigated. The study of microstructure was performed by optical microscope. Dynamic mechanical ... -
The effects of autocatalyst copper coating of SiCp on the microstructure of CuSiCp composites
(Universiti Malaysia Perlis, 2009-12-01)In this paper, the autocatalyst copper coating (ACC) of silicon carbide particle (SiCp) was performed after a sequence of surface treatment, sensitization and surface activation processes. The ACC process was operated ... -
The effects of solutionizing temperatures on microstructures of as-received A357 alloy
(Universiti malaysia Perlis, 2009-12-01)Solution treatment has been carried out on as-received A357 alloy at two solution treatment temperatures of 530ºC and 550ºC for 11 hours. The microstructural study was performed by using optical microscope. Optical ... -
Potentiodynamic polarization of Mg-0.22ca alloys containing minor element of Aluminium
(Universiti Malaysia Perlis, 2009-12-01)Mg alloys played a significant role in replacing the existing sacrificial anodes. To maintain the negative potential and its capability in preventing corrosion, Ca and Al was added as alloying elements. Polarization curves ... -
The effects of welding current and welding duration on the shear strength of spot welded austenitic stainless steel
(Universiti Malaysia Perlis, 2009-12-01)Introduction: Resistance spot welding is commonly employed in the fabrication of sheet metal assembly. It can be applied to join metals such as low carbon steel, nickel, aluminum, titanium, copper alloy, stainless steel ... -
Microstructural study of Al-Si-Mg alloy reinforced with stainless steel wires composite via casting technique
(Science Publications, 2008)The microstructural study of Al-Si-Mg alloy reinforced with stainless steel wires (Al-Si-Mg/SSw) has been investigated and focused on the both microstructures in the matrix and near to the interface and also the wetting ... -
Microstructural study and differential scanning Calorimetry analysis at elevated tempatures of superhead As-Cast A357 alloy
(Universiti Kebangsaan Malaysia (UKM), 2008-12-03)The microstructure of superheated as-cast A357 alloy has been analysed to study the solidification structures of α-Al dendrites, eutectic Si particles and intermetallic compounds at different sections of the specimen. ... -
Development of a Lid Sealed furnace for the production of Magnesium alloys
(Universiti Kebangsaan Malaysia (UKM), 2008-12-03)An atmosphere-controlled furnace was designed for the casting process of highly reactive Mg metal and its alloys. Instead of open crucible furnace, the melting process was done under controlled atmosphere which contained ... -
Bahan NANO dan aplikasinya
(Kolej Universiti Kejuruteraan Utara Malaysia, 2004-09) -
Effect of Colloidal SIO2 Content on the Morphology of Coated Ceramic Particles
(Universiti Malaysia Perlis (UniMAP), 2007-06-09)Coated structure on fly ash particles was produced by liquid stirring of colloidal SiO2. Morphological study by means of scanning electron microscope has consent to controlling the present of outer layer by the addition ... -
Preliminary Microstructure and Hardness Studies of A356/Stainless Steel Composite via Gravity Die Casting Technique
(Universiti Malaysia Perlis (UniMAP), 2007-06-09)The microstructure and hardness of A356/stainless steel composite via gravity die casting technique were evaluated. Both nearly completed bonding and incomplete bonding was seen at the stainless steel wire- A356 matrix ... -
The Microsructure and Properties of Aluminium Composite Reinforced with 65 μm Alumina Particles via Powder Metallurgy
(Universiti Malaysia Perlis (UniMAP), 2007-06-09)This article will report the effect of weight percentage on the microstructure and properties of alumina particle reinforced aluminum metal matrix composite. This involved fabrication of aluminum composite via powder ...