| dc.contributor.author | Muhammad Za’im Atif, Che Ahmad | |
| dc.date.accessioned | 2016-10-21T07:21:13Z | |
| dc.date.available | 2016-10-21T07:21:13Z | |
| dc.date.issued | 2015-12 | |
| dc.identifier.uri | http://dspace.unimap.edu.my:80/xmlui/handle/123456789/43754 | |
| dc.description | Access is limited to UniMAP community. | en_US |
| dc.description.abstract | The objective of this project is to design a robot that can climb a rope either
vertically or horizontally by itself. This robot is built with combination of hardware and software interfaces. Arduino is used as the brain of the robot. In addition, the servos
motor, DC motor and limit switches as sensor for detect the obstacle are used in this
robot. Basically, the robot programming is designed so that the robot is able to climb a
rope either in upward or backward direction and it also to detect if there is any obstacles
while in climbing motion. The rope climbing robot is very effective for climbing
proposes especially to places which is dangerous for human or place where human
could not be reached. | en_US |
| dc.language.iso | en | en_US |
| dc.publisher | Universiti Malaysia Perlis (UniMAP) | en_US |
| dc.subject | Climbing robot | en_US |
| dc.subject | Robotics | en_US |
| dc.subject | Robots -- Design and construction | en_US |
| dc.subject | Arduino | en_US |
| dc.title | Rope climbing robot | en_US |
| dc.type | Learning Object | en_US |
| dc.contributor.advisor | Shahrulnizam Mohd Mukhtar | en_US |
| dc.publisher.department | Faculty of Engineering Technology | en_US |
