dc.contributor.author | Mohamad Khlouf, Munzer | |
dc.contributor.author | Saidatul Norlyana, Azemi | |
dc.contributor.author | Azremi Abdullah, Al-Hadi | |
dc.contributor.author | Soh, Ping Jack | |
dc.contributor.author | Mohd Faizal, Jamlos | |
dc.date.accessioned | 2021-01-06T00:55:27Z | |
dc.date.available | 2021-01-06T00:55:27Z | |
dc.date.issued | 2017 | |
dc.identifier.citation | MATEC Web of Conferences, vol.140, 2017, 4 pages | en_US |
dc.identifier.issn | 2261-236X (online) | |
dc.identifier.uri | http://dspace.unimap.edu.my:80/xmlui/handle/123456789/69249 | |
dc.description | Link to publisher's homepage at https://www.matec-conferences.org/ | en_US |
dc.description.abstract | One of the most used antennas in mobile devices is planar inverted F antenna (PIFA). PIFA can be design in dual band frequencies due to the coverage of the wireless service in a mobile device that requires a multiple frequencies. However, the consideration of technical operation has to be combined with an evaluation of the antenna radiation impact on the users. A procedure of PIFA work in GSM (867-960MHz) and GSM (1710-1899MHz) is done using CST Software. The dual band frequency response is obtained by means of an insertion of an L-shaped slot, which is use to tune the operation frequencies. The prototype of the antenna is fabricated as model by CST Software and evaluated. It is found out that the PIFA antenna has a good efficiency, bandwidth as well as produce a maximum gain for the antenna. A key and innovative research is still underway to broaden performance parameters of the antenna. | en_US |
dc.language.iso | en | en_US |
dc.publisher | EDP Sciences | en_US |
dc.relation.ispartofseries | 2017 International Conference on Emerging Electronic Solutions for IoT (ICEESI 2017); | |
dc.subject | Antennas | en_US |
dc.subject | Planar inverted F antenna (PIFA) | en_US |
dc.title | Dual Band Planar Inverted F Antenna (PIFA) with L-Shape Configuration | en_US |
dc.type | Article | en_US |
dc.identifier.doi | https://doi.org/10.1051/matecconf/201714001019 | |