| dc.contributor.author | Khairul Salleh, Basaruddin | |
| dc.date.accessioned | 2009-11-12T03:59:38Z | |
| dc.date.available | 2009-11-12T03:59:38Z | |
| dc.date.issued | 2009-10-11 | |
| dc.identifier.citation | p.10C 1 - 10C 4 | en_US |
| dc.identifier.isbn | 978-967-5415-07-4 | |
| dc.identifier.uri | http://dspace.unimap.edu.my/123456789/7247 | |
| dc.description | Organized by School of Mechatronic Engineering (UniMAP) & co-organized by The Institution of Engineering Malaysia (IEM), 11th - 13th October 2009 at Batu Feringhi, Penang, Malaysia. | en_US |
| dc.description.abstract | A series of finite element analysis have been
undertaken on Fiber Glass Reinforced Epoxy (FRGE) laminates having fiber orientation of ± 30º, ± 45º and ± 60º subject to axial.
Ratcheting of the FRGE laminate has been observed and recorded in the axial direction using ABAQUS package. The results obtained from the finite element work shows a direction in fiber orientation seemed to have effect on the rate of ratcheting. The composite with fiber orientation angle ±60° from the axial load had shown the highest rate of ratcheting compared to fiber orientation angles ±45° and ±30°. Thus, the increasing of fiber angle from the axial load will increase the rate of ratcheting. | en_US |
| dc.language.iso | en | en_US |
| dc.publisher | Universiti Malaysia Perlis | en_US |
| dc.relation.ispartofseries | Proceedings of International Conference on Applications and Design in Mechanical Engineering 2009 (iCADME 2009) | en_US |
| dc.subject | Glass fibers | en_US |
| dc.subject | Glass-reinforced plastics | en_US |
| dc.subject | Finite element method | en_US |
| dc.subject | Laminated plastics | en_US |
| dc.subject | Impact testing | en_US |
| dc.title | Uniaxial ratcheting of fiber glass reinforced epoxy: the effect of the fiber orientation | en_US |
| dc.type | Working Paper | en_US |
