Final Year Project Papers & Reports
Browse by

Collections in this community
-
Faculty of Engineering Technology (FYP) [200]
Full text contents of this collection is only available online for UniMAP communities -
School of Bioprocess Engineering (FYP) [377]
Full text contents of this collection is only available online for UniMAP communities
Recent Submissions
-
Synthesis of chitosan-based bioplastic from seafood waste
(Universiti Malaysia Perlis (UniMAP), 2019-06)Through these recent years, the application of plastic has increase especially in food packaging field. This results in increase of the environment pollution such as emission of CO2 and landfills since the plastics are ... -
Transport properties of evaporative cooling in a seashell packed bed cooling tower
(Universiti Malaysia Perlis (UniMAP), 2019-06)Packing material is the most crucial part in the operation of cooling tower. This project was aimed to investigate the transport properties of evaporative cooling using seashell as packing material in a packed bed tower. ... -
Evaluation of polyferric silicate sulfate derived from rice husk for turbidity removal
(Universiti Malaysia Perlis (UniMAP), 2019-06)Rice husk is a natural material available in large quantities as agricultural waste. The rice husk is rich in silicon oxide which is up to 98% from the ash content. Burning rice husk generates rice husk ash (RHA) which is ... -
Optimization of enzymatic saccharification of acetic acid pretreated rice biomass using ofat method
(Universiti Malaysia Perlis (UniMAP), 2019-06)Rice biomass which is a comprised of rice straw and rice husk known as the most abundant and high-volume of biomass in the world. It is recorded that 1 ton of paddy harvested generate approximately 220 kg of rice husk. ... -
Insecticidal activity of kaffir lime (citrus hystrix) against rice weevil (sitophilus oryzae)
(Universiti Malaysia Perlis (UniMAP), 2019-06)Rice weevil, Sitophilus oryzae L. known as one of the major pests of stored grain, they ate the rice and lay eggs inside rice kernels. Bioinsecticide have known as one of the safest insecticide in term of its sustainability ... -
Ammonium adsorption-desorption by using rice husk biochar
(Universiti Malaysia Perlis (UniMAP), 2019-05)Rice husk was utilized into biochar by pyrolysis and used as adsorbent for ammonium removal. Rice husk biochar (RHB) was produced at temperature of 350⁰C, 400⁰C, 450⁰C, 500⁰C, and 550⁰C. Characteristics of biochar were ... -
Dynamic mechanical analysis of hybrid sugarcane bagasse/rice husk polymer composite
(Universiti Malaysia Perlis (UniMAP), 2017-06)Dynamic mechanical properties of hybrid sugarcane bagasse/rice husk (SCB/RCH) polymer composite with and without the presence of compatibilizing agent, MA-g-PP were studied. Hybrid polymer composite were prepared with ... -
Power factor properties of Vanadium element doping on B-site of CaMnO₃
(Universiti Malaysia Perlis (UniMAP), 2017-06)Effect of dopant on thermoelectric properties of CaMnO₃ was investigated. The thermoelectric properties for compound CaMnXO₃ where X= V was calculated by using Density Functional Theory (DFT) in Quantum ESPRESSO and BoltzTraP ... -
Effect of heating duration on the morphology, composition and optical properties of SiC nanomaterials synthesized by microwaves heating
(Universiti Malaysia Perlis (UniMAP), 2017-06)Silicon carbide nanomaterials has recently drawn an attention of industrial interest due to their excellent mechanical properties especially for silicon carbide nanowhiskers (SiCNWs) which is high thermal stability, good ... -
Synthesis and properties evaluation of sintered bioglass based on 58% SiO₂ - 38% CaO - 4% P₂O₅
(Universiti Malaysia Perlis (UniMAP), 2017-06)In this study, 58% SiO₂ - 38% CaO - 4% P₂O₅ bio-glass was synthesised using sol-gel method, pressed into pellets and sintered at three different temperature i.e. 600⁰C, 800⁰C and 1000⁰C. The effect of different sintering ... -
Study on the effect different weight percentage of alumina on aluminium metal matrix composite
(Universiti Malaysia Perlis (UniMAP), 2017-06)This paper report the studies the effect of difference weight of alumina particles on pure Aluminium Metal Matrix Composite. The research was done due to the fact to improve the mechanical strength of Al alloy by using ... -
Study on characterization and properties of epoxy hollow spheres
(Universiti Malaysia Perlis (UniMAP), 2017-05)The elementary aim of this research work is to determine the properties of the Epoxy Syntactic Foam (ESF) and the factors that will diversify their properties. The ESF used in this experiment was ESF filled with Epoxy ... -
The effect of sintering time on 8 Mol% Yttria Stabilized Zirconia (8YSZ) ceramic
(Universiti Malaysia Perlis (UniMAP), 2017-06)Sinterability of granulated and milled 8mol% Yttria Stabilized Zirconia (8YSZ) ceramics was investigated in this present research. Samples milled and granulated 8YSZ were compacted by using uniaxial pressing at 370 MPa in ... -
Enhancing sugarcane bagasse and rice husk polymer composite performance through process optimization
(Universiti Malaysia Perlis (UniMAP), 2017-04)Natural fillers have an excellent potential as reinforcement in polymer composites industries. The use of natural fillers in composites is an interesting issue, which has growing consideration and experimentation during ... -
Fabrication and interfacial modification of Nypa Fruticans husk (NFH)/ recycled plastics composites materials
(Universiti Malaysia Perlis (UniMAP), 2017-06)The effect of Nypa Fruticans husk (NFH) content and its chemical modification with 3-Aminopropyltriethoxysilane (3-APE) on the tensile properties, morphological and FTIR analysis of rPP/rHDPE/NFH composites were investigated. ... -
A Study of potential of nickel electroplating onto AI alloy
(Universiti Malaysia Perlis (UniMAP), 2017-06)Electroplating of nickel onto aluminium alloy surface by using nickel sulphate solution as an electrolyte solution. In this study, to determine the effect of different voltage on nickel plating. The aluminium plate was ... -
A study of zinc electroplating process on mild steel in soil water environment application
(Universiti Malaysia Perlis (UniMAP), 2017-06)The effect of current density applied to the electroplating process will influence on the surface of mild steel has been investigate by using artificial soil water (CaSO₄.2H₂O). The current density used for this study is ... -
The effect of filler content and chemical modification on properties of Polylactic acid/ Polymethyl Methacrylate/ Nypa Fruticans husk biocomposites
(Universiti Malaysia Perlis (UniMAP), 2017-06)The biocomposites of Nypa fruticans Husk (NFH) and poly (lactic acid) (PLA)/polymethyl methacrylate (PMMA) were prepared using a twin-screw extruder. The biocomposites were extruded at 180 ºC to 250 ºC, feeder screw of 8 ... -
Effect of scan rate on the corrosion performance of Sn-9Zn solder
(Universiti Malaysia Perlis (UniMAP), 2017-06)The corrosion behaviour of Sn-9Zn solders and the effect of corrosion properties of Sn-9Zn solders in sodium chloride (NaCl) solution were studied in open circuit potential and polarized conditions. The corrosion test was ... -
Effect of Potentiodynamic polerization scan rate on the corrosion performance of SN-0.7CU solder in salt solution
(Universiti Malaysia Perlis (UniMAP), 2017-06)To investigate corrosion properties of Sn-0.7Cu solders at different scan rate in 3.5 wt% NaCl. To evaluate microstructure, elemental and phase evolution of Sn-0.7Cu solder after NaCl exposure. To study the corrosion ...