Zul Azhar Zahid Jamal, Dato' Prof. Dr.
Browse by
About Dato’ Prof. Dr. Zul Azhar Zahid Jamal
Dato’ Prof. Dr. Zul Azhar Zahid Jamal is currently a Professor Dr. at Faculty of Electronic Engineering Technology , Universiti Malaysia Perlis
He was formerly from School of Microelectronic Engineering
ORCID ID: https://orcid.org/0000-0003-3971-2147
Scopus Author ID: 18935174100
Email: Zul Azhar Zahid Jamal
Research Interests
Electronic Materials
Quantum Dots
Nanostructures
Thin Films
Recent Submissions
-
Synthesis and Characterization of Stabilized Zirconia Toughened Alumina (ZTA) Doped Niobium Pentoxide (Nb2O5)
(EDP Sciences, 2016)The main target of this research is to study the mechanical properties of the Nb2O5 doped with alumina-zirconia composites. Pellets form samples of ZTA (5YSZ) doped niobium pentoxide in varied amount of 0 wt%, 0.3 wt%, 0.5 ... -
Fabrication of calcium phosphate coating on pure magnesium substrate via simple chemical conversion coating: surface properties and corrosion performance evaluations
(Elsevier, 2018)The main objective of the current work was to fabricate calcium phosphate (CaP) coating on 99.9% purity magnesium, Mg substrate through simple chemical conversion method and evaluated the surface properties and corrosion ... -
A brief review of layered rock salt cathode materials for lithium ion batteries
(Trans Tech Publications, 2013)Nowadays, many researchers have been studying on the layered rock salt-type structure as cathode materials for the lithium ion batteries. LiCoO2 is the most commonly used cathode material but Co is costly and toxic. Thus, ... -
Ferroelectric and relaxor ferroelectric to paralectric transition based on Lead Magnesium Niobate (PMN) materials
(Trans Tech Publications, 2013)First ferroelectric materials were found in Rochelle salt was in a perovskite structure. Lead Magnesium Niobate (PMN) is a perovskites with a formula of PbMg1/3Nb2/3O3 (PMN) and are typical representatives for most of all ... -
Synthesis of finite length multi level sequences for clutter rejection in radar
(Institute of Electrical and Electronics Engineers (IEEE), 2012-07-24)In radar systems the very low side-lobes that can be achieved with amplitude and phase modulated pulse trains make their use particularly attractive in systems requiring a large dynamic range. Moreover, the excellent ... -
Development and performance evaluation of hierarchical quadrature amplitude modulation (HQAM) for image transmission over wireless channels
(Institute of Electrical and Electronics Engineers (IEEE), 2011-09-20)Asymmetric modulation techniques like Quadrature Amplitude Modulation system is one of the key techniques in building a broadband mobile communication network because of increasing shortage of wireless communication channels. ... -
Chemical modification of chitosan-filled polypropylene (PP) composites: The effect of 3-aminopropyltriethoxysilane on mechanical and thermal properties
(Taylor & Francis Group, 2011-01)Chitosan was used as filler in polypropylene (PP) polymer. In order to improve compatibility between chitosan and PP, chitosan was chemically modified with 3-aminopropyltriethoxysilane (3-APE). The results show that the ... -
Mechanical and thermal properties of chitosan-filled polypropylene composites: The effect of acrylic acid
(Society of Plastics Engineers, 2011-06)The mechanical properties, morphology, and thermal properties of chitosan-filled polypropylene (PP) composites have been studied. The effect of the chemical modification of chitosan by acrylic acid treatment was also ... -
Temperature cycling analysis for ball grid array package using finite element analysis
(Emerald Group Publishing Limited, 2011)Purpose – The purpose of this paper is to discuss the capability of finite element analysis (FEA) in performing the virtual thermal cycling reliability test to evaluate the reliability of solder joints in a ball grid array ... -
Understanding the small world: an insight into the application of transmission electron microscopy in characterizing epitaxial layers
(Penerbit Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2010-04)Transmission electron microscopy (TEM) is an unrivalled technique for observing, characterizing and analyzing almost any type of materials. In physical science, the first observations of defects (i.e. dislocations) by TEM ... -
Si-quantum Dots (QD) and SiO2 tunnel barriers
(Universiti Malaysia Perlis (UniMAP)Pejabat Timbalan Naib Canselor (Penyelidikan dan Inovasi), 2008-07)Oxidation of Si for nanostructures on silicon-on-insulator (SOI) substrates is a key process in the fabrication of Si single electron transistor (SET). The most di cult aspect of the fabrication process is the formation ... -
A cost effective and consummate fabrication teaching set up for microelectronic engineering undergraduate
(Malaysian Invention & Design Society (MINDS), 2005-05-19)The package, which is fully designed and developed using KUKUM in-house expertise, is the first teaching laboratory that is purposely built for undergraduate microelectronic program in Malaysia. -
Electrode design and planar uniformity of anodically etched small area porous silicon
(American Institute of Physics, 2009-06-01)Porous silicon layer microstructure is sensitive to many parameters, which need to be controlled during etching. These include not only anodization time, current density, applied potential and electrolyte composition but ... -
A Cost Effective Negative Plenum Cleanroom for Microelectronic Engineering Undergraduate Programme
(Kementerian Pengajian Tinggi Malaysia (KPTM), 2005-09-30)To design and build a microelectronic cleanroom which is compatible to other commercially installed clenroom for the purpose of teaching undergraduate and postgraduate students in the field of microelectronic fabrication. -
MOS Transistor Mask Design Using SEM Based E-Beam Lithography
(Malaysian Invention & Design Society (MINDS), 2006-05-19)Electron beam lithography (EBL) is one of the alternative tools in transferring micro and nano circuit patterns from design editor to the substrate. EBL is state-of-the-art technology for micro and even to nano feature ... -
MOSFET Technology for Microelectronic Engineering Undergraduate Programme
(Kementerian Pengajian Tinggi Malaysia (KPTM), 2005-09-30)This project focused on the process development of MOSFET fabrication. Microelectronic fabrication equipment and facilities from the micro fabrication cleanroom laboratory in KUKUM were used for the purposes of this project. ... -
MOS Transistor (Fabricated Using In-House Low Cost Facilities)
(Malaysian Invention & Design Society (MINDS), 2006-05-19)MOS Transistor is divided into two types: NMOS and PMOS. Majority carrier od NMOS is electrons whereby PMOS is holes. The MOS transistor consists of three regions namely source, drain and gate. Fabrication of MOS transistor ... -
KUKUM Artificial Marble
(Kementerian Pengajian Tinggi Malaysia (KPTM), 2005-09-30)KUKUM artificial marble can be processed as one-piece structure, so it can eliminates the problem of assembly by providing a one piece solution. -
Affordable and Effective Microelectronic Engineering Teaching Package for Undergraduate Programme
(International Exhibition of Inventions, 2006-04-05)The package, which is fully designed developed, using KUKUM in house expertise, is the first teaching laboratory that is purposely built for undergraduate microelectronic program in Malaysia. -
Quantum Dot Single Electron Transistor Structure Formation Using E-Beam Lithography
(C. I. S. Network, 2007-05-18)To achieve room temperature operation of single electron transistor (SET). To form single dot chanted for electron transport in SET via the Coufomb Blockade Oscillation (CBO) phenomenon.