School of Environmental Engineering (FYP): Recent submissions
Now showing items 201-220 of 437
-
The role of palm oil fiber (POF) on strength of hardened concrete
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2013-06)Technology in concrete has been developing in many ways to enhance the quality and properties of concrete. One of the technological advances in improving the quality of concrete is by using additives. Additives was ... -
The effect of groundwater to deep excavation
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2013-06)Excavation is the process by which soil or rock is removing in order to reach required level. Materials resulting from such excavation often employed as fill for embankment or for other construction purposes on the same ... -
Study of bottom ash from Malaysia municipal solid waste incineration as binder material In cement
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2013-06)The garbage problem in Malaysia is a serious concern. The vacant land area to be used as a landfill is also limited. This has led the government to apply the incinerator system as a method to reduce the quantity of solid ... -
Rubber band as partial replacement of fine aggregate in concrete production
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2013-06)Nowadays people are paying more attention to the sustainability in construction and to improve the quality of the concrete using recycle or waste product. As in this research, the fine aggregates in concrete are replace ... -
Premix waste as a partial replacement of aggregate in concrete
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2013-06)Premix waste (PW) as a partial replacement of aggregate in concrete. Three percentages to investigate PW as a partial replacement of aggregate which is 20%, 30% and 50% of PW. Slump test and compressive test will carried ... -
Investigation of the building defects at Kuala Perlis flats
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2013-06)The defect of concrete structures is a common phenomenon in the construction industry. Structural defect can occur in buildings and other structural parts and it is very difficult to detect and unknown cause. This study ... -
Analysis of retaining wall using eurocode and british standard
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2013-06)In today's modern era, land is quite limited for development. This deficiency leads to the development of land in areas involving slopes and hilly. Development usually involves a lot of work such as cutting and embankment ... -
Properties of concrete containing guava seed
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2013-06)This project presents the result of experiment to produce concrete cube containing guava seed as sand replacement. The guava seed was used as part of sand replacement in the mix of concrete. Forty eight concrete cubes with ... -
The properties of mortar strength containing palm oil clinker with difference mixing procedure
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2013-06)As a major manufacturer of palm oil in the world, one of the great challenges facing is the disposal of the waste product from the palm oil mill. These waste products will lead to environmental hazards that contribute to ... -
Stability assessment of man-made slope
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2013-06)Study of slope stability is important for further purposed in construction and other infrastructure. Assessment stability on man-made slope is essential part because man-made slope exists all over the world. The objective ... -
Study on physical and geotechnical properties of Jana Manjung coal ash mixtures
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2013-06)Most of coal-burning power plant produced residue by-product after burning process such as fly ash and bottom ash with approximate production ratio of 80% fly ash and 20% bottom ash. In the past, most of the coal burning ... -
Behavior of concrete with saw dust at fresh and hardened states
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2013-06)Nowadays technology in concrete has been developing in many ways to enhance the quality and properties of concrete. For this project, saw dust is used in the making of concrete. This project is carried out to study the ... -
The role of rice husk ash (RHA) as cement replacement on the compressive strength of concrete
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2013-06)The use of pozzolanic material from waste product as partial cement replacement in concrete contribute to reduce the environmental, economic problem through their waste and as well enhance the strength and properties of ... -
Comparison between BS 8110: Part 1: 1997 and Eurocode 2 for design the reinforced concrete slab
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2013-06)In European countries, the use of codes of practice Eurocode 2 (EC 2) has been applied since 2004. However, in Malaysia, BS 8110 is still used for the design of the building. Thus, the code of practice is being implemented ... -
Comparison of classifying soils in Perlis between USCS and AASHTO standard
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2013-06)Soil classification very important because of it can classify soil based on their characteristic. There are many type of soil classification has been used based on the engineering. Several example of soil classification ... -
Fundamental periods for medium-rise Reinforcement Concrete (RC) buildings
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2013-06)EC 2 standard and EC 8 standard as a parameter in determined the characteristic of fundamental period. From the research, the analyses were conducted based on the physical properties, and strength properties. The research ... -
Critical review on site conventional system: request for inspection (RFI) paper foam
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2013-06)Request For Inspection (RFI) is form that very synonym in site construction. It is used in every single step of construction such as to construct basement of the building. This form will be used in 3 phase of the ... -
Masonry bond strength by using palm oil clinker with different aggregate replacement and different mixing procedure
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2013-06)Mortar is very important thing in building composite because it is use to bind brick to become the wall. The wall is use to block anything that come from outside of the building to get into the inside of the building. ... -
Identification properties of concrete containing coconut shell as replacement of sand
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2013-06)Nowadays, people are paying more attention on the sustainability in construction field. Therefore, the engineers are finding the ways to improve the quality of the concrete using recycle or waste product. One of the ... -
Behavioral study of concrete composite with mixture of fly ash and concrete sludge aggregate
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2013-06)Nowadays, the high demand of cement and aggregate are an indication of development especially for the construction industry. Thus, the alternative to replace partial replacement of cement and aggregate are by using the ...