Nik Noriman Zulkepli, Assoc. Prof. Ts. Dr.: Recent submissions
Now showing items 41-60 of 60
-
The influence of cure characteristics and crosslink density of virgin acrylonitrile butadiene rubber/recycled acrylonitrile butadiene rubber (vNBR/rNBR) blends
(Trans Tech Publications, 2014)Cure characteristics and crosslink density of virgin acrylonitrile butadiene rubber/recycled acrylonitrile butadiene rubber (vNBR/rNBR) blends were studied. Three different size ranges of rNBR particles, i.e., 150 - 350 ... -
The effects of dynamic vulcanization in virgin polyethylene (vPE)/ recycled polyethylene (rPE)/ ethylene propylene diene terpolymer (EPDM) blends: Tensile properties and morphology
(Trans Tech Publications, 2014)The effects of dynamic vulcanisation in vPE/rPE/EPDM blends were studied. The discarded polyethylene used in the study was obtained from local cable manufacturers. The effects of different sulfur loading on the tensile ... -
Tensile and morphological properties of low density polyethylene/ spear grass composites
(Trans Tech Publications, 2014)The spear grass content on the tensile properties, morphology of low-density polyethylene (LDPE)/spear grass was investigated. The compatibilising effect of epoxidised natural rubber (ENR 50) LDPE and spear grass was mixed ... -
Natural rubber/styrene butadiene rubber/recycled nitrile glove (NR/SBR/rNBRg) ternary blend: Curing characteristics and swelling test
(Trans Tech Publications, 2014)Curing characteristics and swelling behavior of natural rubber/styrene butadiene rubber/recycled nitrile glove (NR/SBR/rNBRg) blends were investigated. Eleven composition ratio; 50/50/0, 50/40/10, 50/30/20, 50/20/30, ... -
Physical and morphological properties of styrene butadiene rubber/recycled chloroprene rubber (SBR/CRr) blends - The effects of TOR as a compatibilizer
(Trans Tech Publications, 2014)The effects of physical and morphological properties of TOR as a compatibilizer of styrene butadiene rubber/recycled chloroprene rubber (SBR/CRr) blends were investigated. Blends. Both uncompatibilised and compatibilised ... -
The influence of CB, silica and CaCO₃ on tensile and morphological properties of vPE/rPE/EPDM blends
(Trans Tech Publications, 2014)The virgin polyethylene (vPE) and recycled polyethylene (rPE) was melt blended with ethylene propylene diene terpolymer (EPDM) in different ratio by using a Haake Rheomix at 180°C and 50 rpm were prepared. The characterization ... -
The effects of dynamic vulcanization in virgin polyethylene (vPE)/recycled polyethylene (rPE)/ethylene propylene diene terpolymer (EPDM) blends: Thermal properties and swelling behaviour
(Trans Tech Publications, 2013)The effects of dynamic vulcanization on the thermal properties and swelling behaviour of vPE/rPE/EPDM blends were studied. The discarded polyethylene used in the study was obtained from local wire insulation industry. The ... -
The effects of carbon black, silica and calcium carbonate in virgin PE/recycle PE/EPDM blends: Thermal properties & swelling analysis
(Trans Tech Publications, 2013)The effects of carbon black (CB), silica and calcium carbonate (CaCO3) in virgin polyethylene (vPE)/recycle polyethylene (rPE)/ethylene propylene diene terpolymer (EPDM) blends were investigated. rPE was melt blended with ... -
The effects of carbon black and calcium carbonate as a filler on cure characteristic and physical properties of SBR/CRr blends
(Trans Tech Publications, 2013-12)Filler are compounding ingredients added to a rubber compound for the purpose of iether reinforcing or cheapening the compound. Despite that, fillers can also be used to modify the physical properties of both unvulcanized ... -
Cure characteristics and hardness of recycled latex catheter (LCr) filled with Standard Malaysia Rubber (SMR L) compounds
(Trans Tech Publications, 2013)The effect of cure characteristics and hardness of LCr filled SMR L compound were investigated. The size of LCr were 20 - 25 mm in range. Six compounds; 0, 5, 15, 2 5, 35 and 5 0 per hundred rubber (phr) of LCr were prepared ... -
Research development of solder materials and its intermetallic compound (IMC) study
(Scientific.Net/Trans Tech Publications, 2012-12)Nowadays, the formation and the subsequent growth of the intermetallic compounds (IMCs) and the development of new lead-free solder systems is a major issue in soldering. The excessive growth formation of intermetallic ... -
Research advances of composite solder material fabricated via powder metallurgy route
(Scientific.Net/Trans Tech Publications, 2012-12)Researches and studies on composite solder have been done by many researchers in an effort to develop viable lead-free solders which can replace the conventional lead-based solders as lead is considered as toxic. Solder ... -
Effect of pyrolysis on the wettability behaviour of polyethylene terephthalate on petroleum coke
(Scientific.Net, 2012-12)In depth investigations has been carried out on thermoplastic polymers, polyethylene terephthalate (PET). The interaction between PET and PC substrate was studied to investigate the effect of oxygen-containing polymer on ... -
The effects of tensile and morphological properties of Styrene Butadiene Rubber/Recycled Chloroprene Rubber (SBR/CRr) blends
(Scientific.Net, 2012-12)The effects of tensile and morphological properties of styrene butadiene rubber/virgin chloroprene rubber blends (SBR/CRv) and styrene butadiene rubber/recycled chloroprene rubber blends (SBR/CRr) were investigated. The ... -
Effect of epoxidized natural rubber on thermal properties, fatigue life, and natural weathering test of styrene butadiene rubber/recycled acrylonitrile-butadiene rubber (SBR/NBRr) blends
(John Wiley & Sons, Inc., 2012-01)The utilization of waste rubber powder in polymer matrices provides an attractive strategy for polymer waste disposal. Addition of recycled acrylonitrile-butadiene rubber (NBRr) in rubber compounds gives economic (lowering ... -
Medicplast - a novel and green biodegradable medical plastic bag
(Macao Innovation & Invention Association, 2012-06-29)In this project, raw materials such as plastics bags, spear grass and pumpkin are seed use as the materials to produce safer biodegradable plastic bag. Moreover it safe to the human body, solve farm problem as well as ... -
Green underfill - a novel green polymer hybrid as underfill material in electronic packaging application
(Macao Innovation & Invention Association, 2012-06-29)Underfill is a material used to provide a stronger mechanical connection, provide heat bridge and to ensure the soldier joint are not stressed out due to differential heating on the chip and the rest of system. -
A Study of FTIR, Thermal Properties and Natural Weathering Test on NBRVirgin/Recycled with SBR Blends
(Taylor & Francis, 2012)The effects of styrene butadiene rubber/virgin acrylonitrile butadiene rubber (SBR/NBRv) blends and styrene butadiene rubber/recycled acrylonitrile butadiene rubber (SBR/NBRr) blends on properties such Fourier transform ... -
Curplast - A new generation green additive for plastic
(Ministry of Education, ThailandThe Office of Basic Education Commission, 2012-06-28)CurPLAST known as the natural pro-oxidant product is absolutely a green product. The main ingredients are recycled plastics waste combined curcumin and Imperata Brasiliensis grasses, which can be obtained at low cost, ... -
Biocomp - A novel green panel from recycled green material
(Ministry of Education, ThailandThe Office of Basic Education Commission, 2012-06-28)The purpose of the BiocoMAP invention is an alternative replacement for wood or plastic composites made from 100% recycled materials; which has been used in the various application such as in the transportation, building, ...