Browsing Mohd Nazree Derman, Assoc. Prof. Dr. by Issue Date

Now showing items 1-20 of 66

    • Study the effect of TIO2 and soaking time to the natural hydroxyapatite properties 

      Shahrizal, M. H.; Sri Asliza, Md Amin; Mohd Nazree, Derman; Mohd Zaheruddin, Kasmuin (Universiti Sains Malaysia (USM), 2006-05-24)
      Natural hydroxyapatite has potential to be used as implant material in biomedical applications. In this study natural HA were obtained from bovine bone by heated and ground into desired size. Dense natural HA were fabricated ...

    • Study of anodised PM Aluminium matrix composite reinforced with 15 wt % Saffil Alumina short fibre 

      Mohd Nazree, Derman; Zainal Arifin, Ahmad; Luay Bakir, Hussian; Nurulakmal, Mohd Sharif (Malaysian Institute for Nuclear Technology Research (MINT), Xapp Malaysia-MNS & Universiti Kebangsaan Malaysia (UKM), 2006-11-29)
      A study of wear behaviour on anodised PM aluminium matrix composites (AMC) reinforced with Saffil™ alumina short fibres was done. AMC was fabricated by powder metallurgy methods (PM) with using Al flake powders and Saffil™ ...

    • High temperature corrosion behaviour of steel with a Carbonate deposit at 1123K 

      Habsah, Md Ishak; Mohammed Misbahul, Amin; Nazree, Derman; Khairul Rafezi, Ahmad (School of Materials Engineering, 2007)
      The high temperature corrosion behavior of A1S1 304 austenitic stainless steel and S45C carbon steel were studied in presence with CaCO3 salt at 1123K for 24,48,72, 96 and 120 hour. The studies were carried out to determine ...

    • Study of wear on anodised PM Aluminium Matrix composite reinforced with 15 wt % Saffil Alumina Short Fibre 

      Mohd Nazree, Derman; Zainal Arifin, Ahmad; Luay Bakir, Hussain; Nurulakmal, Mohd Sharif (Universiti Malaysia Perlis, 2007-06-09)
      A study of wear behaviour on anodised powder metallurgy aluminium matrix composites (PM AMC) reinforced with Saffil™ alumina short fibres was done. AMC was fabricated by powder metallurgy methods (PM) with using Al flake ...

    • Erosion corrosion of PM Aluminium Reinforced with Alumina Saffil in NaCI and sand solution 

      Mohd Nazree, Derman; Mohd Faiz, Bahardin; Kamrosni, Abdul Razak; Noraziana, Parimin; Zaherudin, Kasmuin; Shamsul Baharin, Jamaludin (Universiti Teknologi Malaysia (UTM), 2007-11-26)
      The erosion-corrosion behaviour of anodised and non anodised PM aluminium matrix composite in sodium chloride (NaCl) containing sand has been studied. The AI composite reinforced with 15 wt % short fibre alumina Saffil ...

    • Conductive coating strategy for Magnesium alloy as a surface protection and reliability 

      Ooi Peng Sheng (Universiti Malaysia PerlisSchool of Materials Engineering, 2008)
      The methods and technologies in various coatings for magnesium alloys are studied. The magnesium alloy used in this final year project is AZ91D, which is still in very early using stages in semiconductor industry. This ...

    • Biocompatible CBHA 

      Sri Asliza Md Amin; Mohd Nazree Derman, Dr.; Mohd Zaheruddin Kasmuin; Norsuria Mohamed; Azida Azmi; Nurul Fazlina Zainal Abidin; Shahrizal Md Hussein (School of Materials Engineering, 2008-01-09)

    • AMCSKUK®: Aluminium Matrix Composite from AL SCRAP and Short Fibre-Alumina 

      Mohd Nazree Derman, Dr. (School of Materials Engineering, 2008-01-09)
      Application of the AMCSKUK using in small automotive component like screw washer, bolt, and nut. Can be used to replace current product made by particle reinforced metal matrix composite

    • Impedance study on Mg Sacrificial anode for soil corrosion protection 

      Zulkifli Zainon (Universiti Malaysia PerlisSchools of Materials Engineering, 2008-05)
      Sacrificial anode is one of the methods that usually applied in soil corrosion protection especially magnesium (Mg) based anode. This study is focuses on high-potential Mg anode and pure Mg anode. The value of open-circuit ...

    • A study of hardcoat anodizing on PM Al-Mg composite 

      Mohd Nasuha Ab. Halim (University Malaysia PerlisSchool of Materials Engineering, 2008-05)
      This research is being conducted to investigate an effect occurring on anodizing process on powder metallurgy Aluminium-Magnesium (PM Al-Mg) composite. Composite materials are fabricated by using powder metallurgy method ...

    • The electromechanical study on Magnesium sacrificial anode in cathodic protection 

      Mohd Nazree Derman; Zulkifli Zainon; Shaiful Rizam Shamsudin (Universiti Kebangsaan Malaysia (UKM), 2008-12-03)
      Magnesium is among the anode material usually applied in cathodic protection in soil application. The corrosion behaviour of Mg anode was studied to understand corrosion behaviour of the Mg anode. The electrochemical ...

    • Effects of Magnesium addition on corrosion behaviour of Al-Mg composite fabricated using Powder Metallurgy method 

      Normah Cheman; Mohd Nazree Derman; Nur Maizatul Shima Adzali (Universiti Kebangsaan Malaysia (UKM), 2008-12-03)
      The study was focusing the effects of magnesium addition on corrosion behaviour of PM Al composite. The corrosion behaviour between PM Al composite reinforced with short fibres alumina Saffil™ with and without 2 wt% of ...

    • Development of a Lid Sealed furnace for the production of Magnesium alloys 

      Shaiful Rizam, Shamsudin; Azmi, Kamardin; Mohd Nazree, Derman; Shamsul Baharin, Jamaludin; Azremi, Abdullah Al Hadi; A.M.H. Firdaus; Mazlee, Mohd Noor; C.I. Mahdi; Abdul Razak, Daud; Roslinda, Shamsudin (Universiti Kebangsaan Malaysia (UKM), 2008-12-03)
      An atmosphere-controlled furnace was designed for the casting process of highly reactive Mg metal and its alloys. Instead of open crucible furnace, the melting process was done under controlled atmosphere which contained ...

    • The effect of heat treatment on the open circuit potential of magnesium sacrificial anode 

      A. M. H., Firdaus; Shaiful Rizam, Shamsudin; Shamsul Baharin, Jamaludin; M. N., Derman; Mohd Fitri, Mohd Wahid; M. Z., Ruhiyudin (University of Malaya, 2009)
      Magnesium sacrificial anode that possess high value of open circuit potential, Eoc is needed as it can protect larger area of underground metal structure in cathodic protection. Solution treatment was applied on magnesium ...

    • Effect of solution treatment on Mg galvanic anodes in CaSO4 – MG(OH)2 aqueous solution 

      A. M. H., Firdaus; Shaiful Rizam, Shamsudin; Shamsul Baharin, Jamaludin, Prof. Dr.; M. N., Derman; Mohd Fitri, Mohamad Wahid; C. I., Mahdi (PETRONAS, 2009-07-20)
      The effect of heat treatment on the Mg anode was investigated in CaSO4-Mg(OH)2 aqueous solution. The Mg sample was solutionised at 150oC, Pure and untreated Mg anode were also studied as a reference. Eoc and Tafel corrosion ...

    • The effects of autocatalyst copper coating of SiCp on the microstructure of CuSiCp composites 

      Azmi, Kamardin; Mohd Nazree, Derman; Shaiful Rizam Shamsudin; Mazlee, Mohd Noor; J.A.H., Iqwan (Universiti Malaysia Perlis, 2009-12-01)
      In this paper, the autocatalyst copper coating (ACC) of silicon carbide particle (SiCp) was performed after a sequence of surface treatment, sensitization and surface activation processes. The ACC process was operated ...

    • The effect of heat treatment on the anode efficiency of Magnesium sacrificial anode 

      A.M.H., Firdaus; Saiful Rizam, Shamsudin; Shamsul Baharin, Jamaludin; Mohd Nazree, Derman (Universiti Malaysia Perlis, 2009-12-01)
      High efficiency sacrificial anode from Mg alloy is needed as it has higher capability of protecting underground metal structure against corrosion in cathodic protection. Solution treatment was applied to Mg sacrificial ...

    • Potentiodynamic polarization of Mg-0.22ca alloys containing minor element of Aluminium 

      Shaiful Rizam, Shamsudin; Mohd Nazree, Derman; C.I., Mahdi; Azmi, Kamardin; Abd. Razak, Daud; Mazlee, Mohd Noor; A.M.H., Firdaus; G., Sasirehka (Universiti Malaysia Perlis, 2009-12-01)
      Mg alloys played a significant role in replacing the existing sacrificial anodes. To maintain the negative potential and its capability in preventing corrosion, Ca and Al was added as alloying elements. Polarization curves ...

    • Effect of alloying elements (Ni and Cr) on density and hardness of Co alloy fabricated by powder metallurgy 

      Raudhah, Othman; Shamsul Baharin, Jamaludin; Mohd Nazree, Derman (Universiti Malaysia Perlisp.1-5, 2009-12-01)
      Influences of Ni and Cr addition on the properties of powder metallurgy Co base alloys were investigated. The alloys were produced by powder metallurgy technique and sintered under argon atmosphere. Scanning electron ...

    • Electrochemical behaviour of PM Al-Mg composites reinforced with alumina saffil short fibres 

      Normah, Cheman; Mohd Nazree, Derman; Ismail, Talib (Universiti Malaysia Perlis, 2009-12-01)
      The electrochemical behaviour of powder metallurgy (PM) Al-Mg composites, PM Al composites and PM Al-Mg alloy have been compared with standard PM Al in 3.5 wt% NaCl. The effects of alumina Saffil short fibres reinforcement ...