Browsing Noorina Hidayu Jamil, Madam by Title

Now showing items 1-11 of 11

    • Acid medium sonication: a method for the preparation of low density talc nano-sheets 

      Noorina hidayu, Jamil; Palaniandy, Samayamutthirian, Dr. (Elsevier, 2010)
      Talc nano-sheets having a thickness of around 12nm, a high shape asymmetry, and a well-preserved crystalline order were prepared by jet milling followed by anacid medium sonication process. Milling facilitates the exfoliation ...

    • Comparative study of water-based and acid based sonications on structural changes of talc 

      Noorina hidayu, Jamil; Palaniandy, Samayamutthirian, Dr. (Elsevier BV, 2011)
      Talc was sonicated in both water and acid media up to 100h and 40h, respectively. The sonicated talc exhibited severe delamination and reduction of the plate diameter in the lateral dimension. The density of sonicated ...

    • Effect of process parameters on the cooling performance of liquid cooling system for electronic application 

      Wan Mohd Arif, Wan Ibrahim; Yeoh, Cheow Keat, Dr.; Teh, Pei Leng, Dr.; Noorina Hidayu, Jamil (Trans Tech Publications, 2013)
      This project is focused to study on the cooling performance of liquid cooling system under different process parameter. In this research, a liquid cooling system with copper block that simulates CPU, was setup to identify ...

    • Extraction of silica from palm ash using organic acid leaching treatment 

      Faizul, Che Pa; Abdullah, Chik, Prof. Madya Dr.; Md Fazlul, Bari, Dr.; Noorina Hidayu, Jamil (Trans Tech Publications, 2014)
      Agricultural wastes such as palm ash and rice husk have a possibility to be used as a usefully renewable source for production of energy and silica (SiO2). Extensive researches have been carried out to extract silica from ...

    • Fabrication of porous ceramic-geopolymer based material to improve water absorption and retention in construction materials: a review 

      Noorina Hidayu, Jamil; ‪Wan Mohd Arif, W Ibrahim; Mohd Mustafa Al Bakri, Abdullah; Sandu, Andrei Victor; Muhammad Faheem, Mohd Tahir (IOP Publishing Ltd, 2017-06)
      Porous ceramic nowadays has been investigated for a variety of its application such as filters, lightweight structural component and others due to their specific properties such as high surface area, stability and permeability. ...

    • Influence of milling conditions on the mechanochemical synthesis of CaTiO3 nanoparticles 

      Noorina hidayu, Jamil; Palaniandy, Samayamutthirian, Dr. (Elsevier, 2009)
      The mechanochemical synthesis of calcium titanate (CaTiO3), was carried out in a planetary mill by varying the milling time and mill rotational speed at three levels. CaCO3 and TiO2 were used as the starting materials. ...

    • Phase Transformation of Kaolin-Ground Granulated Blast Furnace Slag from Geopolymerization to Sintering Process 

      Noorina Hidayu, Jamil; Mohd Mustafa Al Bakri, Abdullah; Faizul, Che Pa; Hasmaliza, Mohamad; Wan Mohd Arif, W. Ibrahim; Ikmal Hakem, Aziz; Jeż, Bartłomiej; Nabiałek, Marcin (MDPI AG, 2021-02)
      The main objective of this research was to investigate the influence of curing temperature on the phase transformation, mechanical properties, and microstructure of the as-cured and sintered kaolin-ground granulated blast ...

    • Potential application of palm ash as a raw materials in production of green glass 

      Noorina Hidayu, Jamil; Mohd Mustafa Al Bakri, Abdullah; Faizul, Che Pa; Ruhiyuddin, Mohd Zaki; Murizam, Darus; Che Mohd Ruzaidi, Ghazali, Prof. Madya; Mohamed Faisol, Mohamed Nor (Scientific.Net/Trans Tech Publications, 2012-12)
      Oil Palm Ash is one of the abundance agricultural wastes found in Malaysia. This wastes need to be disposed properly. Oil palm ash contains compounds needed to produce glass. Most of raw materials (especially silica) used ...

    • Production of silicon carbide via grinding and heat treatment process 

      Noorina Hidayu, Jamil; Xian, W. Hui; Wan Mohd Arif, Wan Ibrahim; Faizul, Che Pa; Ruhiyuddin, Mohd Zaki (Trans Tech Publications, 2014)
      This study is to determine the properties and characterization of silicon carbide via grinding and heat treatment process. In this study, the raw materials used were waste glass and graphite powder. Silicon carbide was ...

    • Production of wollastonite from local resources 

      Noorina Hidayu, Jamil; Wan Mohd Arif, Wan Ibrahim; Noorhamizah, Muhd Said (Trans Tech Publications, 2013)
      This project is focused on the production of wollastonite (CaSiO3) from local resources. Wollastonite was produced by milling silica (SiO2) and limestone (CaCO3) in planetary mill for 1 and 5 hours. Samples have been ...

    • Self-Fluxing Mechanism in Geopolymerization for Low-Sintering Temperature of Ceramic 

      Faizul, Che Pa; Hasmaliza, Mohamad; Wan Mohd Arif, W. Ibrahim; Amonpattaratkit, Penphitcha; Gondro, Joanna; Sochacki, Wojciech; Norfadhilah, Ibrahim (MDPI AG, 2021-03-10)
      Kaolin, theoretically known as having low reactivity during geopolymerization, was used as a source of aluminosilicate materials in this study. Due to this concern, it is challenging to directly produce kaolin geopolymers ...