Browsing Ho Li Ngee, Dr. by Issue Date
Now showing items 1-20 of 20
-
Electrical properties and thermal stability of Cu-P containing electrically conductive adhesives
(Universiti Malaysia Perlis, 2009-12-01)Electrically conductive adhesives (ECA) containing Cu-P and Cu as metallic filler, respectively, were studied in term of electrical properties and thermal stability. Both metallic fillers used in this study were prepared ... -
Mineralization of diazo dye (Reactive Black 5) in wastewater using recirculated up-flow constructed wetland reactor
(Desalination Publications, 2012)Application of a sequential anaerobic and aerobic process in a constructed wetland can enhance the treatment performance of textile wastewater. In this study, two laboratory-scale recirculated up-flow constructed wetland ... -
Photocatalytic mineralization of azo dye Acid Orange 7 under solar light irradiation
(Desalination Publications, 2012)The objective of this study was to investigate mineralization of hazardous water soluble azo dye Acid Orange 7 (AO7) under photocatalytic process. In this experiment, sunlight was used as the source for UV irradiation and ... -
Performance and kinetic study on bioremediation of diazo dye (reactive black 5) in wastewater using spent GAC-biofilm sequencing batch reactor
(Springer Science+Business Media B.V., 2012-05)Combinations of sequential anaerobic and aerobic process enhance the treatment of textile wastewater. The aim of this study was to investigate the treatment of diazo dye Reactive Black 5 (RB5)- containing wastewater using ... -
Enhanced photocatalytic activity of fish scale loaded TiO 2 composites under solar light irradiation
(Elsevier B.V., 2012-06)Fish scale (FS) loaded TiO2 composites were investigated as photocatalysts in degradation of Methyl Orange under solar light irradiation. Composites were prepared through sol-gel method by varying mass ratio of TiO2/FS at ... -
Degradation of synthetic dye wastewater by using combined anaerobic-aerobic and aerobic sequencing batch reactors
(Universiti Malaysia Perlis (UniMAP), 2012-06-18)Azo dyes are the dye used by the majority of the textile industries. The treatment options for this azo dye are physical, chemical and biological methods. The aim of this study was to assess the performance of dye ... -
Photocatalytic degradation of binary azo dyes solution by using titanium oxide suspensions
(Universiti Malaysia Perlis (UniMAP), 2012-06-18)Photocatalytic degradation of binary Acid Orange 7 (AO7) and Reactive Green 19 (RG19) under sunlight irradiation in titanium oxide (TiO2) suspensions was investigated. The objectives of this study is to evaluate the ... -
Comparative study on photocatalytic degradation of mono azo dye acid orange 7 and methyl orange under solar light irradiation
(Springer Science+Business Media B.V., 2012-09)The objective of this study was to investigate and compare the kinetic photocatalytic degradation of mono azo dyes Acid Orange 7 (AO7) and Methyl Orange (MO) under solar light irradiation with titanium dioxide (TiO 2) as ... -
Surfactant-free synthesis of copper particles for electrically conductive adhesive applications
(TMS, 2012-09)In this study, a simple one-step microwave-assisted method was developed to synthesize Cu and Cu-Ag particles for application in electrically conductive adhesive (ECA). The particle size of the obtained Cu particles was ... -
Photocatalytic degradation of reactive black 5 by fish scale-loaded TiO 2 composites
(Springer Science+Business Media B.V., 2012-09)Titania and TiO 2/fish scale composites at different mass ratios (90:10, 70:30, and 50:50) were prepared by sol-gel method for application as photocatalysts in this study. Fish scale, synthesized TiO 2, and TiO 2/fish scale ... -
Decolorization of methyl orange using upflow anaerobic sludge blanket (UASB) reactor-An investigation of co-substrate and dye degradation kinetics
(Taylor & Francis, 2013)Decolorization of a synthetic wastewater containing Methyl Orange (MO) azo dye was performed in an upflow anaerobic sludge blanket (UASB) reactor. Color removal efficiencies approaching 94, 90 and 96% were obtained with ... -
Solar photocatalytic degradation of mono azo methyl orange and diazo reactive green 19 in single and binary dye solutions: Adsorbability vs photodegradation rate
(Springer-Verlag Berlin Heidelberg, 2013-05)The objective of this study was to examine the effects of adsorbability and number of sulfonate group on solar photocatalytic degradation of mono azo methyl orange (MO) and diazo Reactive Green 19 (RG19) in single and ... -
Influence of post-curing and coupling agents on polyurethane based copper filled electrically conductive adhesives
(Springer Science+Business Media New York, 2013-06)Effects of post curing and silane coupling agents with different functional groups such as epoxy, isocyanate and ureide on the electrical and mechanical properties of copper (Cu) filled electrically conductive adhesives ... -
Evaluation of integrated anaerobic-aerobic biofilm reactor for degradation of azo dye methyl orange
(Elsevier Ltd., 2013-09)This study was to investigate the mineralization of wastewater containing methyl orange (MO) in integrated anaerobic-aerobic biofilm reactor with coconut fiber as bio-material. Different aeration periods (3. h in phase 1 ... -
Adsorption behavior of cationic and anionic dyes onto acid treated coconut coir
(Taylor and Francis Group, LLC., 2013-09)The adsorption of Methylene Blue (MB) and Acid Orange 7 (AO7) from aqueous solutions by acid treated coconut coir was investigated under laboratory conditions to assess its potential in removing cationic and anionic dyes. ... -
Properties of phenolic-based Ag-filled conductive adhesive affected by different coupling agents
(Taylor and Francis Group, LLC., 2013-11)In this study, a phenolic-based Ag flake-filled electrically conductive adhesive (ECA) was investigated in terms of rheological, electrical, and mechanical properties. To clarify the effect of various Ag flake filler content ... -
A simple one-step anodising method for the synthesis of ordered porous anodic alumina
(Taylor & Francis, 2014)Porous anodic alumina (PAA) has been produced on aluminium substrate by single-step anodising at 50 V in 0.3 M oxalic acid at 15°C for 60 min. The highly ordered pore and cell structure was achieved by subjecting the PAA ... -
Comparison on biodegradation of anionic dye orange II and cationic dye methylene blue by immobilized microorganisms on spent granular activated carbon
(Taylor & Francis Online, 2014-01)Activated carbon adsorption and biological degradation are two important methods used in the treatment of industrial wastewater among others. The objective of this study is to investigate the biodegradation of anionic dye ... -
Copper-filled electrically conductive adhesives with enhanced shear strength
(ASM International, 2014-09)In this study, the effects of diethyl carbitol (diluent) and tertiary amines on the electrical, mechanical, and rheological properties of the Cu-filled polyurethane-based electrically conductive adhesives (ECAs) were ... -
Influence of Sintering Temperature on Crystallization Behavior of Cordierite synthesized from Non-Stoichiometric Formulation
(EDP Sciences, 2016)Cordierite body with formulation of non-stoichiometric composition (2.5 MgO. 1.8 Al2O3. 5 SiO2) was synthesized using conventional techniques with standard raw materials. The sintering and crystallization behavior of the ...