Shayfull Zamree Abd Rahim, Assoc. Prof. Ir. Dr.
Browse by
About Assoc. Prof. Ir. Dr. Shayfull Zambree Abd. Rahim
Assoc. Prof. Ir. Dr. Shayfull Zambree Abd. Rahim is currently a Associate Professor Ir. at Faculty of Mechanical Engineering Technology, Universiti Malaysia Perlis
He was formerly from School of Manufacturing Engineering
ORCID ID: https://orcid.org/0000-0002-1458-9157
Scopus Author ID: 54941291700
Email: Shayfull Zambree Abd. Rahim
Research Interests
Optimization
Materials
Materials Processing
Material Characterization
Mechanical Properties
News
Skills and Expertise:Material Characterization, Materials, Mechanical Properties Design Engineering, Mechanical Behavior of Materials, Microstructure CAD,Optimization, Material Characteristics, Materials Processing, Materials Testing Mechanical Engineering, Product Development, Process Simulation, Product Engineering, Analysis, Welding, Alloys Polymer Processing, Manufacturing Engineering Mechanics, Polymer Technology, Manufacturing Systems, Engineering Design ANOVA, Injection Molding, Response Surface Methodology Simulation Software, Taguchi Method,Simulation Experiments.
Recent Submissions
-
Effect of aluminium powder on kaolin-based geopolymer characteristic and removal of Cu²⁺
(MDPI AG, 2021-02)This current work focuses on the synthesis of geopolymer-based adsorbent which uses kaolin as a source material, mixed with alkali solution consisting of 10 M NaOH and Na₂SiO₃ as well as aluminium powder as a foaming agent. ... -
Performance of Sn-3.0Ag-0.5Cu composite solder with kaolin geopolymer ceramic reinforcement on microstructure and mechanical properties under isothermal ageing
(MDPI AG, 2021-02)This paper elucidates the effect of isothermal ageing at temperature of 85 °C, 125 °C and 150 °C for 100, 500 and 1000 h on Sn-3.0Ag-0.5Cu (SAC305) lead-free solder with the addition of 1 wt% kaolin geopolymer ceramic (KGC) ... -
Hybrid mold: comparative study of rapid and hard tooling for injection molding application using Metal Epoxy Composite (MEC)
(MDPI AG, 2021-02)The mold-making industry is currently facing several challenges, including new competitors in the market as well as the increasing demand for a low volume of precision moldings. The purpose of this research is to appraise ... -
Optimisation of Shrinkage and Strength on Thick Plate Part Using Recycled LDPE Materials
(MDPI AG, 2021-04-05)Achieving good quality of products from plastic injection moulding processes is very challenging, since the process comprises many affecting parameters. Common defects such as warpage are hard to avoid, and the defective ... -
Tool wear and surface evaluation in drilling fly ash geopolymer using HSS, HSS-Co, and HSS-TiN cutting tools
(MDPI AG, 2021-03-26)This paper reports on the potential use of geopolymer in the drilling process, with respect to tool wear and surface roughness. The objectives of this research are to analyze the tool life of three different economy-grade ... -
Warpage optimisation using Recycled Polycar-bonates (PC) on Front Panel Housing
(MDPI AG, 2021-03-15)Many studies have been done using recycled waste materials to minimise environmental problems. It is a great opportunity to explore mechanical recycling and the use of recycled and virgin blend as a material to produce new ... -
Warpage Optimisation on the Moulded Part using Response Surface Methodology (RSM) and Glowworm Swarm Optimisation (GSO)
(EDP Sciences, 2017)Nowadays, there are various of optimisation methods that have been explored by many researchers to find the appropriate processing parameters setting for the injection moulding process. From the previous researches, it was ... -
Warpage Optimisation on the Moulded Part with Conformal Cooling Channels using Response Surface Methodology (RSM) and Glowworm Swarm Optimisation (GSO)
(EDP Sciences, 2017)Today, there are many of optimisation method have been explored by previous researchers to find the appropriate processing parameters setting for the injection moulding process. From the previous researches, it has been ... -
Effect on Mechanical Properties of Heat Treated High Manganese Austenitic Cast Iron
(EDP Sciences, 2016)This work presents an attempt to study the effect of manganese addition and heat treatment on higher carbon austenitic cast iron to form high manganese austenitic cast iron with reduced nickel content (Mn-Ni-resist) on ... -
Analysis of Strength on Thick Plate Part using Genetic Algorithm Optimisation Method
(EDP Sciences, 2016)This study focuses on the optimisation of the injection moulding parameters to maximise the strength ofmoulded parts using a simulation software. The moulded parts were injected with Acrylonitrile- Butadiene-Styrene (ABS) ... -
Investigation on microstructure of heat treated high manganese austenitic cast iron
(EDP Sciences, 2016)The effect of manganese addition and annealing heat treatment on microstructure of austenitic cast irons with high manganese content (Mn-Ni-resist) were investigated. The complex relationship between the development of the ... -
Shrinkage analysis on thick plate part using Response Surface Methodology (RSM)
(EDP Sciences, 2016)The work reported herein is about an analysis on the quality (shrinkage) on a thick plate part using Response Surface Methodology (RSM). Previous researches showed that the most influential factor affecting the shrinkage ... -
Analysis of shrinkage on thick plate part using genetic algorithm
(EDP Sciences, 2016)Injection moulding is the most widely used processes in manufacturing plastic products. Since the quality of injection improves plastic parts are mostly influenced by process conditions, the method to determine the optimum ... -
The Influence of Selective Laser Melting Parameters on Density and Mechanical Properties of AlSi10Mg
(EDP Sciences, 2016)Selective Laser Melting (SLM) is one of the most effective powder bed technique in the additive Manufacturing (AM) which able to fabricate functional metal parts directly from 3D Computer Aided Design (CAD) file data. In ... -
Dimensional accuracy and surface roughness analysis for AlSi10Mg produced by Selective Laser Melting (SLM)
(EDP Sciences, 2016)Selective Laser Melting (SLM) is an Additive Manufacturing (AM) technique that built 3D part in a layer-by-layer method by melting the top surface layer of a powder bed with a high intensity laser according to sliced 3D ... -
Investigation on Microstructure of Heat Treated High Manganese Austenitic Cast Iron
(EDP Sciences, 2016)The effect of manganese addition and annealing heat treatment on microstructure of austenitic cast irons with high manganese content (Mn-Ni-resist) were investigated. The complex relationship between the development of the ... -
The influence of Rice Husk Fiber on The Properties of Epoxidized Natural Rubber/Rice Husk Compounds
(EDP Sciences, 2016)In this work, curing characteristics, tensile and physical properties of epoxidized natural rubber/ rice husk (ENR-50/RH) compounds were investigated. Different RH loading (10, 20, 30, 40 and 50 Phr) and size (fine size ... -
Application of Firefly Algorithm for Parameter Estimation of Damped Compound Pendulum
(EDP Sciences, 2016)This paper presents an investigation into the parameter estimation of the damped compound pendulum using Firefly algorithm method. In estimating the damped compound pendulum, the system necessarily needs a good model. ... -
A new invention of alarm reminder locking (ARL) security system
(Engg Journals Publications, 2016-02-01)Alarm Reminder Locking (ARL) Security System mainly focuses on a door security system, which can install in the door area to increase the security level for home, office room, hostel or other places. This system used Arduino ... -
A study on two plate and three plate mold of ultra thin plates in minimizing warpage issue
(Praise Worthy Prize, 2011-11)The demand of ultra thin plastic parts in global industries is increasing today. Ultra thin plastic parts are widely produced using injection molding processes and it is understood that warpage issue is regularly found in ...
RSS 1.0