Effect of aluminium powder on kaolin-based geopolymer characteristic and removal of Cu²⁺
View/ Open
Date
2021-02Author
Nurliyana, Ariffin
Mohd Mustafa Al Bakri, Abdullah
Postawa, Przemysław
Shayfull Zamree, Abd Rahim
Mohd Remy Rozainy, Mohd Arif Zainol
Ramadhansyah, Putra Jaya
Sliwa, Agata
Mohd Firdaus, Omar
Metadata
Show full item recordAbstract
This current work focuses on the synthesis of geopolymer-based adsorbent which uses kaolin as a source material, mixed with alkali solution consisting of 10 M NaOH and Na₂SiO₃ as well as aluminium powder as a foaming agent. The experimental range for the aluminium powder was between 0.6, 0.8, 1.0 and 1.2wt%. The structure, properties and characterization of the geopolymer were examined using X-Ray Diffraction (XRD), Infrared Spectroscopy (FTIR) and Scanning Electron Microscopy (SEM). Adsorption capacity and porosity were analysed based on various percentages of aluminium powder added. The results indicate that the use of aluminium powder exhibited a better pore size distribution and higher porosity, suggesting a better heavy metal removal. The maximum adsorption capacity of Cu²⁺ approached approximately 98%. The findings indicate that 0.8% aluminium powder was the optimal aluminium powder content for geopolymer adsorbent. The removal efficiency was affected by pH, adsorbent dosage and contact time. The optimum removal capacity of Cu²⁺ was obtained at pH 6 with 1.5 g geopolymer adsorbent and 4 h contact time. Therefore, it can be concluded that the increase in porosity increases the adsorption of Cu²⁺.