Browsing Sam Sung Ting, Assoc. Prof. Ts. Dr. by Issue Date
Now showing items 1-20 of 28
-
Cure characteristics and hardness of recycled latex catheter (LCr) filled with Standard Malaysia Rubber (SMR L) compounds
(Trans Tech Publications, 2013)The effect of cure characteristics and hardness of LCr filled SMR L compound were investigated. The size of LCr were 20 - 25 mm in range. Six compounds; 0, 5, 15, 2 5, 35 and 5 0 per hundred rubber (phr) of LCr were prepared ... -
Physical and morphological properties of styrene butadiene rubber/recycled chloroprene rubber (SBR/CRr) blends
(Trans Tech Publications, 2013)The effects of physical and morphological properties of styrene butadiene rubber/virgin chloroprene rubber blends (SBR/CRv) and styrene butadiene rubber/recycled chloroprene rubber blends (SBR/CRr) were investigated. Both ... -
Effect of cobalt stearate on outdoor exposure of LLDPE/soy spent powder blends
(Trans Tech Publications, 2013)In this study, the degradability of low linear density polyethylene (LLDPE) and soy spent powder blends under outdoor exposure of Malaysia. Cobalt stearate was used as a pro-oxidant. The degradation of the blends was ... -
Corn cob filled chitosan biocomposite films
(Trans Tech Publications, 2013)Recently, there has been renews interest in chitosan as materials in producing of biocomposite films. The chitosan (CS)/corn cob (CC) biocomposite films were prepared by solvent casting method. The effect of CC content on ... -
Characterizations on the effect of processing of polymers blend with petroleum coke (part I)
(Trans Tech Publications, 2013)Global demand for plastics has grown significantly over the past decades, and will continue to expand with rising income levels in emerging economies; a number of approaches have been used to recycle polymer waste. While ... -
The effect of different sizes "Batu Reput" (Dolomite) as a filler in SMR L and ENR-50
(Trans Tech Publications, 2013)The effects of different sizes of "Batu Reput" (Dolomite) filler which are smaller size (<63μm) and bigger size (75-150μm) on tensile and morphological properties of "Batu Reput" (Dolomite) filled SMR L and epoxidized ... -
Tensile properties LLDPE/soya spent powder blends: Oven aging
(Trans Tech Publications, 2013)Linear low-density polyethylene (LLDPE)/soya spent powder blends with different blends ratio were prepared by using internal mixer. Soya spent powder was varied from 5 to 40 wt. The thermal degradability was assessed by ... -
Effect of compost medium on oxidative- linear low density polyethylene/soya powder blends
(Trans Tech Publications, 2013)One alternative to enhance the degradability of polyethylene is the addition of prooxidant substances to their matix. The polymer materials are called oxo-biodegradable. Current investigation aimed to assess the abiotic ... -
Thermal properties of linear-low density polyethylene (LLDPE)/soya spent powder blends with the addition of epoxidised natural rubber
(Trans Tech Publications, 2013)Soya spent powder as an inexpensive and renewable source has been used as a filler for linear-low density polyethylene (LLDPE) in this study. Linear-low density polyethylene (LLDPE)/soya spent powder composites were prepared ... -
Chitosan/corn cob biocomposite films by cross-linking with glutaraldehyde
(North Carolina State University, 2013-05)Corn cob (CC) was used as a filler in chitosan (CS) biopolymer films. The effect of glutaraldehyde (GLA) as a crosslinking agent was studied in an effort to improve the properties of CS/CC biocomposite films prepared via ... -
Comparison of mechanical properties of polypropylene/acrylonitrile butadiene rubber/rice husk powder composites modified with silane and acetic anhydride compound
(Trans Tech Publications, 2013-09)Polypropylene(PP)/Acrylonitrile butadiene rubber(NBRr)/rice husk powder(RHP) composites was fabricated with silane and acetic anhydride treatment agent. The in- situ formed RHP filled PP/NBRr composites were prepared by ... -
The influences of tor as a compatibilizer on cure characteristic and morphological properties of SBR/CRr blends
(AENSI Publisher All rights reserved, 2013-10)Cure characteristics and morphological studies were performed to determine the influences of TOR as a compatibilizer of styrene butadiene rubber/recycled chloroprene rubber (SBR/CRr) Blends. Both uncompatibilised and ... -
Tensile properties and FTIR analysis of HDPE/soya spent powder in oven aging
(AENSI Publisher All rights reserved, 2013-10)This investigation involves pure HDPE and then HDPE with addition of soya spent powder with different weight percentagesbefore and after exposing in the oven aging. The characteristics of pure HDPE and HDPE/ soya spent ... -
Natural rubber/styrene butadiene rubber/recycled nitrile glove (NR/SBR/rNBRg) ternary blend: Tensile properties & morphology
(AENSI Publisher All rights reserved, 2013-10)Recycling waste rubber products by utilising them in rubber blends had provided the simplest and most cost-effective ways in solving several environmental issues regarding the abundance of scrap rubbers. Discarded nitrile ... -
The tensile properties and morphology analysis of recycled mattress filled natural rubber compounds
(AENSI Publisher All rights reserved, 2013-10)The tensile properties and morphology analysis of Recycled Mattress (rMat) filled Standard Malaysian Rubber (SMR L) and Epoxidized Natural Rubber (ENR 50) was successfully studied. The both compounds were prepared by two ... -
Degradation of epoxidized natural rubber compatibilized linear low density polyethylene/soya powder blends: The effect of natural weathering
(Walter de Gruyter GmbH, 2013-10)In the present study, linear low density polyethylene (LLDPE)/soya powder blends were compatibilized with epoxidized natural rubber (ENR 50) and exposed to natural weathering. The exposure period for the blends was 1 year. ... -
Modified corn cob filled chitosan biocomposite films
(Taylor and Francis Group, LLC., 2013-11)The present work was investigated the effect of filler content and chemical modification on mechanical, thermal properties and morphology study of CS/CC biocomposite films. The acrylic acid was used as chemical modification ... -
Properties of natural rubber/ethylene propylene diene monomer/recycled latex catheter (NR/EPDM/rLC) ternary blends: Cure characteristics and hardness
(Trans Tech Publications, 2013-12)Currently, the recycled rubber widely being used in rubber technology. Due to difficulty on reprocessing techniques, the vulcanized rubbers being a big problem in the recycled field. One of the main forms of discharge ... -
Effect of blends ratio on mechanical and morphological properties of LDPE/Thermoplastic soya spent powder blends
(Trans Tech Publications Inc., 2014)This study investigates the properties of blends made from low density polyethylene (LDPE) with various levels of thermoplastic soya spent powder (SSP). The thermoplastic TPSSP content was varied from 5 to 20wt % whereas ... -
Physical and morphological properties of styrene butadiene rubber/recycled chloroprene rubber (SBR/CRr) blends - The effects of TOR as a compatibilizer
(Trans Tech Publications, 2014)The effects of physical and morphological properties of TOR as a compatibilizer of styrene butadiene rubber/recycled chloroprene rubber (SBR/CRr) blends were investigated. Blends. Both uncompatibilised and compatibilised ...