dc.contributor.author | Muhammad Hafiz, Hamidi | |
dc.contributor | School of Manufacturing Engineering | en_US |
dc.date.accessioned | 2021-02-17T03:07:10Z | |
dc.date.available | 2021-02-17T03:07:10Z | |
dc.date.issued | 2015-12 | |
dc.identifier.uri | http://dspace.unimap.edu.my:80/xmlui/handle/123456789/69739 | |
dc.description | Access is limited to UniMAP community. | en_US |
dc.description.abstract | During the turning process, heat in generated at the edge of cutting tool. This heat is then dissipated through 4 parameter that is cutting tool, work piece, the chipped formed and the cutting fluid. In this experiment, the objective is carried out to studying the temperature
measurement on the cutting tool. This experiment is about to examine the effect of different
cutting speed and depth of cut on the tool during the turning process and the temperature
generate on the cutting tool using infrared fluke camera. From this experiment it shows that
the reading of heat generation influence by increment of cutting speed and depths of cut.
The depth of cut gives more significance effect to the heat generation compare to the
spindle speed. | en_US |
dc.language.iso | en | en_US |
dc.publisher | Universiti Malaysia Perlis (UniMAP) | en_US |
dc.subject | Turning process | en_US |
dc.subject | Cutting tool | en_US |
dc.subject | Turning machine | en_US |
dc.subject | Heat | en_US |
dc.title | Thermal study of cutting tool in turning process | en_US |
dc.type | Learning Object | en_US |
dc.contributor.advisor | Suhaila, Hussain, Dr. | |