Final Year Project Papers & Reports: Recent submissions
Now showing items 101-120 of 2736
-
Enhancing sugarcane bagasse and rice husk polymer composite performance through process optimization
(Universiti Malaysia Perlis (UniMAP), 2017-04)Natural fillers have an excellent potential as reinforcement in polymer composites industries. The use of natural fillers in composites is an interesting issue, which has growing consideration and experimentation during ... -
Fabrication and interfacial modification of Nypa Fruticans husk (NFH)/ recycled plastics composites materials
(Universiti Malaysia Perlis (UniMAP), 2017-06)The effect of Nypa Fruticans husk (NFH) content and its chemical modification with 3-Aminopropyltriethoxysilane (3-APE) on the tensile properties, morphological and FTIR analysis of rPP/rHDPE/NFH composites were investigated. ... -
A Study of potential of nickel electroplating onto AI alloy
(Universiti Malaysia Perlis (UniMAP), 2017-06)Electroplating of nickel onto aluminium alloy surface by using nickel sulphate solution as an electrolyte solution. In this study, to determine the effect of different voltage on nickel plating. The aluminium plate was ... -
A study of zinc electroplating process on mild steel in soil water environment application
(Universiti Malaysia Perlis (UniMAP), 2017-06)The effect of current density applied to the electroplating process will influence on the surface of mild steel has been investigate by using artificial soil water (CaSO₄.2H₂O). The current density used for this study is ... -
The effect of filler content and chemical modification on properties of Polylactic acid/ Polymethyl Methacrylate/ Nypa Fruticans husk biocomposites
(Universiti Malaysia Perlis (UniMAP), 2017-06)The biocomposites of Nypa fruticans Husk (NFH) and poly (lactic acid) (PLA)/polymethyl methacrylate (PMMA) were prepared using a twin-screw extruder. The biocomposites were extruded at 180 ºC to 250 ºC, feeder screw of 8 ... -
Effect of scan rate on the corrosion performance of Sn-9Zn solder
(Universiti Malaysia Perlis (UniMAP), 2017-06)The corrosion behaviour of Sn-9Zn solders and the effect of corrosion properties of Sn-9Zn solders in sodium chloride (NaCl) solution were studied in open circuit potential and polarized conditions. The corrosion test was ... -
Effect of Potentiodynamic polerization scan rate on the corrosion performance of SN-0.7CU solder in salt solution
(Universiti Malaysia Perlis (UniMAP), 2017-06)To investigate corrosion properties of Sn-0.7Cu solders at different scan rate in 3.5 wt% NaCl. To evaluate microstructure, elemental and phase evolution of Sn-0.7Cu solder after NaCl exposure. To study the corrosion ... -
The incorporation of Epoxidized Natural Rubber (ENR) into Styrene-butadiene Rubber (SBR)/Polybutadiene Rubber (BR) blends
(Universiti Malaysia Perlis (UniMAP), 2017-06)In this study, the ternary rubber blends of epoxidized natural rubber (ENR), styrene butadiene rubber (SBR) and butadiene rubber (BR) are blended with eight different formulations to observe the effects of the ternary blend ... -
Preparation and characterization of cassava starch foams: effect of foaming temperature
(Universiti Malaysia Perlis (UniMAP), 2017-06)This research was conducted to study the properties and characterization of cassava starch foam. The cassava starch foam were prepare by mixing the ingredient of desired formulation consists two variables such as the amount ... -
Studies on the effect of waste plastic on the reduction with iron ore at high temperature
(Universiti Malaysia Perlis (UniMAP), 2017-04)This work investigated the effect of waste plastic (low density polyethylene (LDPE)) on the reduction with iron ore at high temperature. The composite pellets of different compositions were formed from the mixtures of iron ... -
Effects of zinc addition on microstructure and properties of aluminum based alloys fabricated by sand casting process
(Universiti Malaysia Perlis (UniMAP), 2017-04)Al-Zn alloys were prepared by using sand casting method. The casting process was carried out by several stages that are the preparation of pattern, making of core box, sand mold, melting of raw materials and pouring. The ... -
Flexural strength and crack propagation of porous clay-precipitated calcium carbonate
(Universiti Malaysia Perlis (UniMAP), 2017-06)Porous clay-precipitated calcium carbonate were prepared via polymeric sponge replication method using precipitated calcium carbonate (PCC) and red clay as raw materials. Different compositions of precipitated calcium ... -
Heat extraction of fish oil from Patin catfish (Pangasius Hypophthalmus) and its oil quality analysis
(Universiti Malaysia Perlis (UniMAP), 2018-12)This research is to study the oil quality of patin catfish, Pangasius Hypophthalmus fish oil by using conventional extraction technique. The conventional extraction technique that being used in this research is green ... -
Modeling the relationship of foam density and pore content of a closed cell epoxy foam
(Universiti Malaysia Perlis (UniMAP), 2017-06) -
Effect of Pm element doping on thermoelectric Ca₁-𝑥Pm𝑥MnO₃ where X=0%, 0.083%, 0.167%
(Universiti Malaysia Perlis (UniMAP), 2017-05)The structure of CaMnO₃ is the orthorhombic perovskite has been studied at range of temperature 300K to 1000K. It shows that the thermoelectric properties of CaMnO3₃ is semiconductor. In this research, theoretical study ... -
A study on cobalt reduction onto HA by electroless plating
(Universiti Malaysia Perlis (UniMAP), 2017-04)Main objective of this study is to study the reduction of cobalt onto hydroxyapatite. In this reduction process, electroless plating technique was used where the hydroxyapatite powder was inserted into the solution of ... -
Density functional theory studies on thermoelectric properties of d element Hf doping on a site of CaMnO₃
(Universiti Malaysia Perlis (UniMAP), 2017-06)Effect of dopant on thermoelectric properties of CaMnO₃ was investigated. The thermoelectric properties for compound CaMnO₃ where doped with Hafnium was calculated by using Density Functional Theory (DFT) in Quantum ESPRESSO ... -
Effects of chemical treatment on wood fiber reinforced recycled Polypropylene composites
(Universiti Malaysia Perlis (UniMAP), 2017-06)The surface of wood fiber (WF) used as reinforcement in recycled polypropylene/wood fiber (rPP/WF) composites was modified by silane coupling agent. The effect of filler loading and silane as coupling agent on mechanical, ... -
Studies on the physicochemical and mechanochemical properties of raw and thermally treated dolomite for adsorption application
(Universiti Malaysia Perlis (UniMAP), 2017-04)Dolomite obtained from Chuping, Perlis quarry was mechanically activated at different parameters of planetary milling (miling time and rotational speed of milling) and was thermally treated at temperature from 700-900 °C. ... -
Synthesis of Titanium Dioxide thin film for solar energy application
(Universiti Malaysia Perlis (UniMAP), 2017-05)Titanium Dioxide (TiO₂) nanoparticles have been frequently employed mainly in solar energy application. This is due to the highly efficient photocatalysis action and the costing in preparation of TiO₂ is affordable. In ...