Final Year Project Papers & Reports: Recent submissions
Now showing items 121-140 of 2736
-
The effects of cold rolling process and annealing treatment on damping properties of 3105 aluminum alloy
(Universiti Malaysia Perlis (UniMAP), 2017-04)The effects of cold rolling and annealing treatment on damping properties of 3105 aluminium alloy was studied. The aluminium alloy have deformed by cold rolling process to 50 percent, 60 percent, and 70 percent rolling ... -
Characterization of two different sources of kaolin and local kaolin modification
(Universiti Malaysia Perlis (UniMAP), 2017-11)Kaolin imported from China and local kaolin with difference sieving process which is local kaolin A (bulk sample), local kaolin B (65 μm kaolin) and local kaolin C (45 μm kaolin) were characterized in this present research. ... -
Mechanical properties and microstructural analysis of 304 stainless steel by TIG welding
(Universiti Malaysia Perlis (UniMAP), 2017-06)Gas tungsten arc welding is the process repairing and widely used in heavy engineering for joining metal. It can be uses for various type of metal and application. The aim of this project is to study the effects of 304 ... -
The photocatalytic study of RR2 dye by using pre-irradiated Immobilized TiO₂/PVA system
(Universiti Malaysia Perlis (UniMAP), 2017-04)The investigation of the effect of PVA/TiO₂ loading by layers, and pre – irradiation time are studied for the system optimization and pH and temperature of the dye are being studied to see the photocatalytic activities on ... -
Mechanical properties study of ABS filled with CuFe _2 0 4_+ ZnO at different orientation and speed via 3D printing method
(Universiti Malaysia Perlis (UniMAP), 2017-06)Additive Manufacturing (AM) technologies known as rapid prototyping that offer a viable alternative and easier to fabricated within a short span of time. Acrylonitrile butadiene styrene(ABS) play an important part on 3D ... -
LiNiPO₄, LiNi₀.₅Co₀.₅PO₄ and LINi₀.₃₃Co₀.₃₃Mn₀.₃₃PO₄ as cathode material for lithium ion batteries
(Universiti Malaysia Perlis (UniMAP), 2017-04)In this project, Cobalt (Ni) and Manganese (Mn) is being doped into lithium nickel phosphate (LiNiPO₄) as cathode material for lithium-ion batteries. The method used to synthesis is solid-state reaction. The characterization ... -
The photocatalytic study of RR4 dye by using TiO₂/PVA suspension method
(Universiti Malaysia Perlis (UniMAP), 2017-06)The study of the effects of PVA in TiO₂ slurry method under the presence of oxygen and without oxygen towards the degradation of Reactive Red 4 (RR4) dye has been carried out. The suspension system was prepared by addition ... -
Effect of alkaline pretreatment parameters on waste tea for holocellulose production
(Universiti Malaysia Perlis (UniMAP), 2018-12)The effects of different alkaline pretreatments parameters on removal of holocellulose and lignin features and accessibility are compared and correlated. The pretreatments are shown to modify holocellulose and lignin content ... -
Effect of quartz content and prolonged dry grinding on milling and polymorphic transformation of calcite
(Universiti Malaysia Perlis (UniMAP), 2017-06)The purpose of this research was to investigate the influence of physical properties of quartz content on the prolonged dry grinding on milling and to study the structural and morphological properties of calcite during ... -
The effect of blend ratio on the properties of nanohalloysite filled of carboxymethyl cellulose/nanohalloysite/polylactic acid biocomposite film
(Universiti Malaysia Perlis (UniMAP), 2017-04)The objectives of this study were to determine the effect of nanohalloysite loadings in CMC/HNT biocomposites films and to investigate the effect of blend ratios on the properties of CMC/PLA/HNT biocomposite films. Materials ... -
Preparation and characterization of Sn-Ag-Cu solder paste and Sn-Ag-Cu solder paste composite
(Universiti Malaysia Perlis (UniMAP), 2017-04)This study has been conducted to identify the effect of silicon carbide (SiC) when it is added to the tin-silver-copper solder paste. The amount of SiC added is varied from 0.25 wt%, 0.50 wt%, 0.75 wt% and 1.0 wt%. The ... -
The influence of electrolyte concentration of nickel electroplating onto aluminium substrate
(Universiti Malaysia Perlis (UniMAP), 2017-04)A single layer of electrolytic nickel deposition was carried out on aluminum in an aqueous NiS₂O₄ 7H₂O. The study of the concentration of the electrolyte to the electrolysis process was conducted to evaluate the properties ... -
The study on zinc sacrificial anodes as an external galvanic cell in the underground cathodic protection system
(Universiti Malaysia Perlis (UniMAP), 2017-05)The study additional external galvanic cell in the sacrificial anode cathodic protection system in the protection for buried steel from corrosion has been performed. The exposed area of protected steel 1cm2 and it was ... -
The study of aluminium sacrificial anode as an external galvanic cell in the underground cathodic protection system
(Universiti Malaysia Perlis (UniMAP), 2017-04)The focus of this study is to determine the effectiveness of external galvanic cell as an addition power supply in the sacrificial anode cathodic system. A unit in an external galvanic cell has a cell consisting of sacrificial ... -
A study on Nickel plating onto Stanum oxide by electroless plating method
(Universiti Malaysia Perlis (UniMAP), 2017-06)Currently, stanum oxide (SnO) materials are vigorously investigated due to its potential electronic properties. In most cases SnO layers synthesized by a typical potentiostatic anodization exhibit a characteristic stacked ... -
The effect of compaction on Co-HA mechanical properties
(Universiti Malaysia Perlis (UniMAP), 2017-05)This project conducted to study the effect of compaction of Co-HA on mechanical properties. Cobalt is actively involved in the metabolic process of body such as it promotes the growth of bone tissues and increases the ... -
Optimisation of resistance spot welding process parameters on mild steel by Taguchi method
(Universiti Malaysia Perlis (UniMAP), 2017-06)The paper represents experimental to investigate in studying the optimisation of resistance spot welding process parameters by using taguchi method. The mild steel was selected in this project. The process parameters such ... -
The effect of aluminium content on the bioactivity behaviour of biodegradable magnesium alloys for biomedical applications
(Universiti Malaysia Perlis (UniMAP), 2017-05)Magnesium and its alloy has become the most promising candidate to substitute the conventional biomaterial such as stainless steel, cobalt chromium and titanium nowadays. Its tremendous mechanical properties such as ... -
Thermal aging of Poly (Methyl Methacrylate) composites filled with natural filler
(Universiti Malaysia Perlis (UniMAP), 2017-06)Poly (Methyl Methacrylate)/Palm Kernel Shell (PKS) composites by using Dichloromethane (DCM) as solvent was prepared by solvent casting technique at room termperature. The process started with sieve PKS and dried out ... -
The bioactivity behavior of Magnesium Alloys (AZ91) reinforced with HAP (composite) used for biomedical applications
(Universiti Malaysia Perlis (UniMAP), 2017-04)The aim of this research is to evaluate the effect of hydroxyapatite (HAP) particles content on bioactivity behavior of a composite AZ91/HAP. Novel AZ91 with (0, 3 wt%, 6wt% and 9wt% of HAP) composites were fabricated using ...