Institute of Nano Electronic Engineering (INEE) (Articles): Recent submissions
Now showing items 101-120 of 206
-
Synthesis and characterization of electroless copper coated SiC particles
(Trans Tech Publications, 2013)Silicon carbide reinforced copper matrix (Cu-SiCp) composites fabricated via the conventional powder metallurgy methods have inferior thermophysical properties due to the weak bonding between the copper matrix and the SiCp ... -
The thermal expansion behaviors of Cu-SiCp composites
(Trans Tech Publications, 2013)The demand for advanced thermal management materials such as silicon carbide reinforced copper matrix (Cu-SiCp) composites is increasing due to their high thermal conductivity and low CTE properties. However, the weak ... -
Numerical simulation of microfluidic separators
(Trans Tech Publications, 2013)Microfluidic devices present a powerful platform for working with living cells and even gases. Parameter such as the length and volume scales of these devices in miniaturize system makes it possible to develops and perform ... -
Designing microchannels separator mask for lithography process
(Trans Tech Publications, 2013)Recently microfluidic has drawn attention from fellow research because of their unique properties and behavior in biotechnology, biomedical, micro and nanotechnology. Microfluidic is a combination from several components ... -
Surfactant dependent growth of twinned ZnO nanodisks
(Elsevier, 2014-03)Regular hexagonal twinned ZnO nanodisks were successfully prepared from nanodisks using a controlled hydrothermal method with the assistance of double surfactants. The products were characterized using X-ray powder ... -
Effect of different solvents on the structural and optical properties of zinc oxide thin films for optoelectronic applications
(Elsevier, 2014-01)Zinc oxide (ZnO) seed solutions were prepared using 4 different solvents, namely, methanol (MeOH), ethanol (EtOH), isopropyl alcohol (IPA) and 2-methoxyethanol (2-ME). The prepared seed solutions were used to synthesize ... -
Morphological, structural, and gas-sensing characterization of tin-doped indium oxide nanoparticles
(Elsevier, 2014-01)Tin-doped indium oxide (ITO) nanoparticles with stable cubic phases were synthesized using a sol–gel combustion method that includes gelation and combustion in organic fuel. The influence of SnO₂ on the phase and morphology ... -
FP-LMTO method to calculate the structural, thermodynamic and optoelectronic properties of SixGe1-xC alloys
(Taylor & Francis, 2013-11)The structural and electronic properties of the ternary Si xGe1-xC alloys have been calculated using the full-potential linear muffin-tin-orbital (FP-LMTO) method based on density functional theory within both local density ... -
Structural, elastic, electronic and thermodynamic properties of the filled skutterudite CeOs4Sb12 determined by density functional theory
(Elsevier Ltd., 2013)Structural, elastic, electronic and thermodynamic properties of the ternary cubic filled skutterudite CeOs4Sb12 compound were calculated using the full-potential linear muffin-tin orbital implementation of density functional ... -
Tribological properties of WS2 nanoparticles lubricants on aluminum-silicon alloy and carbon steels
(Walailak University, 2013-06)The rheological properties of nanometric tungsten disulphide (WS2) nanoparticles oil lubricants and its tribological performance with two hypereutectic Al-Si alloy and carbon steel are examined. These two oils are used to ... -
Effect of roughness of hypo-and hyper-eutectic Al-Si piston alloy on wear characteristics under lubrication
(Elsevier B.V., 2013)The tribological behavior of tow Al-Si alloys under the influence of surface roughness average was investigated for the present study. The silicon content of these alloys ranged 10 and 16-wt% Si, and includes hypoeutectic ... -
Thermal expansion behavior of the electroless copper coated Cu-SiCp composites fabricated via the conventional powder metallurgical technique
(Trans Tech Publications, 2014-01)The introduction of the metal matrix composites as the advanced electronic packaging materials is highly anticipated because their thermal properties can be engineered to match those of semiconductors, ceramics substrates ... -
Characteristic and corrosion studies of rare earth (REE) based anodizing on AZ91D magnesium alloy
(Trans Tech Publications, 2014-01)Oxide coatings on AZ91D magnesium alloy were prepared using anodizing technique with 10mA/cm2 current density for 5 minutes in electrolyte containing Mg (NO₃)₂ with NaVO₃ as an additive. The corrosion behaviors of different ... -
Characterization of PM Fe-Cr-Y₂O₃ composites prepared by microwave sintering technology
(Trans Tech Publications, 2014-01)This research is focused on assessing the feasibility of the new and innovative microwave sintering technology for fabricating iron-chromium composites prepared via powder metallurgy route. Accordingly, the microwave ... -
Structural properties of PbI₂ thin film
(Trans Tech Publications, 2014-01)Lead iodide (PbI₂) thin films were successfully prepared by thermal evaporation method on a glass substrate at room temperature. The structural analysis of these films was done by XRD. The results revealed that the crystallite ... -
DNA hybridization detection using less than 10-nm gap silicon nanogap structure
(Elsevier B.V., 2013-09)This report described less than 10-nm gap silicon-based electrode sensor for the discriminating detection of complementary, non-complementary and single nucleotide mismatched DNA targets. Discriminating detection of nucleic ... -
Morphology, analysis and properties studies of CdS nanostructures under thiourea concentration effect for photovoltaic applications
(Electrochemical Science Group, 2013-08)CdS nanostructures are prepared by sol-gel spin coating method using different thiourea concentrations. The thiourea concentration effect for CdS nanostructures deposited on quartz substrate is studied. The CdS nanostructures ... -
Optoelectronic properties of GaAs and AlAs under temperature effect
(Elsevier GmbH, 2013-08)An application study of optoelectronic properties as a function of the temperature for GaAs and AlAs according to our model has been presented using empirical pseudopotential method (EPM). The structural phase transition ... -
Structural properties of Sb- and Te-based binary compounds: Spin-orbit effect
(Versita Warsaw and Springer-Verlag Wien, 2013-01)The band structure of AlSb, GaSb, ZnTe and CdTe is calculated using the empirical pseudopotential method (EPM) coupled with spin-orbit (SO) splitting. We applied our empirical model of bulk modulus with SO effect. It has ... -
Effect of electrolyte concentration on the growth of porous anodic aluminium oxide (AAO) on Al-Mn alloys
(Trans Tech Publications, Switzerland, 2012-12)In this study, the effect concentration of electrolyte on pore nucleation process during anodizing was investigated. It was found that the concentration of oxalic acid influenced the morphologies and regularities of porous ...