Institute of Nano Electronic Engineering (INEE) (Articles): Recent submissions
Now showing items 121-140 of 206
-
Platelet-derived growth factor oncoprotein detection using three-dimensional carbon microarrays
(Elsevier, 2013-01)The potential of aptamers as ligand binding molecule has opened new avenues in the development of biosensors for cancer oncoproteins. In this paper, a label-free detection strategy using signaling aptamer/protein binding ... -
Selection of optimal parameters in fabrication of poly (dimethylsiloxane) microfluidics using taguchi method
(American Scientific Publishers, 2013-01)The excellent performance and achievements by the microfluidics systems at fluid flow manipulation in the recent years have ignited the passion and interest of many researchers around the world, Since a microfluidic is ... -
Technology development for nano structure formation: Fabrication and characterization
(American Scientific Publishers, 2013)The paper contain a report on a technology development for nano structure formation using standard CMOS process-based method capable of fabricating precisely control nano wire and nanogap. The fabrication of nanoscale ... -
Novel in-house fabrication of nano lab-on-chip devices
(Bentham Science Publishers, 2013)20nm SiNWs transducers have been fabricated by means of simple in-house fabrication method. A low cost, simple top-down approach has been successfully used for the fabrication of very sensitive SiNWs. The fabrication was ... -
Microfluidics design and fabrication for life sciences application
(American Scientific Publishers, 2013-01)This paper introduces a simple design and fabrication for microfluidics that need no external pumping power to delivery fluid into sensing domain with minimum sample available. Analysis using COMSOL 3.5 Multiphysics ... -
Polysilicon nanowire fabrication as a transducer for fast reaction assays in nano lab-on-chip domain
(American Scientific Publishers, 2013-02)The difficulty with the treatment of cancer is caused by lack of ability to detect the tumor associated with the disease at the early stage. Often, cancer is detected in its later stages, when it has compromised the function ... -
Design and fabrication of PDMS microchamber for fast reaction assays in biosensing application.
(Trans Tech Publications, 2013)A simple design of a microchamber for use in reacting assays with limited sample availability has been proposed, analyzed using COMSOL 3.5 Multiphysics simulation and fabricated using soft-lithography technique. The design ... -
The electroosmosis mechanism for fluid delivery in PDMS multi-layer microchannel
(American Scientific Publishers All rights reserved., 2013-01)Here we reported on fabrication of multi-layer microstructures that takes the advantage of electroosmosis to mix fluids. Microlaboratories for biochemical applications often require rapid mixing of different fluid streams. ... -
Modeling of structural properties of hexagonal semiconductors
(Elsevier B.V., 2013)Bulk modulus of hexagonal structure semiconductors are calculated by using density functional theory (DFT) of full-potential linear augmented plane wave (FP-LAPW) within general gradient approximation (GGA). In this work, ... -
Alternative-current electrochemical etching of uniform porous silicon for photodetector applications
(Electrochemical Science Group, 2013)The twining of alternative-current (AC) with electrochemical etching (ECE) to fabricate porous silicon (PS) is studied. The porosity percentage is obtained by gravimetric analysis. The effect of different current densities; ... -
Structural investigation of Si0.5Ge0.5 alloy for optoelectronic applications: Ab initio study
(Elsevier GmbH, 2013-11)The structural, electronic and optical properties of the binary silicon-germanium alloy have been investigated using the projector augmented-wave (PAW) calculations with a powerful VASP package (Vienna ab initio simulation ... -
Optical properties of GaN nanostructures for optoelectronic applications
(Elsevier B.V., 2013)Electrochemical deposition method is used to prepare GaN nanostructure. The morphological studies using scanning electron microscopy (SEM), photoluminescence (PL) the refractive index and optical dielectric constant are ... -
Characteristics of nanostructure silicon photodiode using laser assisted etching
(Elsevier B.V., 2013)We prepared nanostructures silicon photodiode (nPSi) by using laser assisted etching at fixed current density (30 mA/cm2) with different etching wavelengths of laser diode (532, 650 and 810 nm), a (metal/nanostructure ... -
Effect of sintering on the physical and mechanical properties of Co-Cr-Mo (F-75)/HAP composites
(Universiti Kebangsaan Malaysia, 2013-12)This paper reports on the effects of HAP addition and sintering temperature on the microstructure and properties of the F-75/HAP composites fabricated by powder metallurgy. Co-Cr-Mo (F-75) is used in orthopedics because ... -
Design of 3D micromixer for bio-synthesis using COMSOL multiphysics software package
(American Scientific Publishers, 2013-12)Moving parts of micrometer scale make the chips very expensive and fragile and are therefore to be avoided if at all possible. An alternative method for transporting fluid in the samples is through capillary effect, the ... -
Effect of manganese content on the fabrication of porous anodic alumina
(Hindawi Publishing Corporation, 2012)The influence of manganese content on the formation of well-ordered porous anodic alumina was studied. Porous anodic alumina has been produced on aluminium substrate of different manganese content by single-step anodizing ... -
Effect of different seed solutions on the morphology and electrooptical properties of ZnO Nanorods
(Hindawi Publishing Corporation, 2012)The morphology and electrooptical properties of ZnO nanorods synthesized on monoethanolamine-based seed layer and KOHbased seed layer were compared. The seed solutions were prepared in monoethanolamine in 2-methoxyethanol ... -
Parametric study and thickness evaluation of photoresist development for the formation of microgap electrodes using surface nanoprofiler
(Scientific.Net, 2012-12)A compact nanolaboratory on single chip is one of the challenging tasks for future reproductively of sensitive and selective lab-on-chip. This paper reports a simple and controllable technique for patterning microgap ... -
A brief review of the current technologies used for the fabrication of metal-molecule-metal junction electrodes
(Scientific.Net, 2012-12)Fabrication techniques for Metal-molecule-metal junction electrodes suitable to study electron tunneling through metal junctions are reviewed. The applications of current technologies such as mechanical break junction, ... -
Controllable oxidization of boron doped nanodiamond covered with different solution via UV/ozone treatment
(Elsevier B.V., 2012-04)UV/ozone irradiation was designed for controllable oxidation of nanodiamond films with distinctive chemical species. XPS investigation revealed that various kinds of oxygen-related chemical components would be functionalized ...