Browsing School of Microelectronic Engineering (FYP) by Title

Now showing items 71-90 of 153

    • Fabrication and characterization of Barium Strontium Titanate (BA1-XSRXTIO3 BST) for heat sensor application 

      Mohd Hafiz Shaari (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2008-04)
      Ferroelectric Barium Strontium Titanate (BST) thin films were successfully prepared by wet chemical deposition or sol-gel method and characterized using SPA, AFM, and sensing properties. The BST thin film was fabricated ...

    • Fabrication and simulation of PNP Bipolar transistor based on Spin On Dopant technique and Electrical characterization 

      Siti Nursyida Azuddin (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2008-04)
      In this project, the fabrication and simulation of pnp transistor was performed. From fabrication process, the electrical characteristic and sheet resistance of the device was observed by 4 point probe measurement. The ...

    • Fabrication Of 50 µm transistor and AlNiAu interconnection process 

      Shaffie Husin (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-03)
      Generally process fabrication transistor will starts by cleaning the wafer, formation region drain, D and source, S, get oxide and deposited aluminum as contact with the source, drain and gate. Mask is very important thing ...

    • Fan control and monitoring system using Visual Basic program 

      Khairul Hisyam Hasan (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2008-04)
      This thesis is about the usage of a system to control and monitor a fan or more for certain kinds of operation and application in real life. This is including on how to control the fan speed manually or by using temperature ...

    • FPGA Implementation of Cash Money Register 

      Mohd Shafari Mohamad Dadiri (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-03)
      Cash money register will record all the sales and help the traders to see with more clearly about their sale. Most sales that have been made will be finish by pressing key “enter” at the keyboard. At the same time, a ...

    • FPGA Implementation of Emergency Door Car Entry System 

      Zaini Sulaiman (Universiti Malaysia Perlis (UniMAP)School of Microelectronic Engineering, 2007-05)
      Emergency door car entry system can be implemented using Field Programmable Gate Array (FPGA) board. FPGA board is a board that can be programmed using source code to run the application that has been downloaded into it. ...

    • FPGA Implementation of One Lane Traffic Light Controller 

      Ahmad Fairuz, Zamberi (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-03)
      Two-way automobile traffic must be supported by a single lane road, such as on narrow bridges in the country, roads under repair, and other narrow streets to prevent road jammed and car accident. To control the two-way ...

    • FPGA Implementation On Alcohol Sensor Vehicle Immobilizer 

      Marjori Chu Phab (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-04)
      Nowadays, car accident cases keep on increasing from day to day. There are many factors that had caused the accident happen. Among the major factors that caused the car accident are such as the equipment failure, poor ...

    • FPGA implementation on secure parking system 

      Mohd Khairul Akli Ab Ghani (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-04)
      Secure parking system is a project which could give a comfort to the users for safety parking their cars especially at the apartment and condominium areas. This idea acquired after intensive observation have been made ...

    • Gate Oxide Integrity (GOI) Characterization For Deep Submicron CMOS Device 

      Norain Mohd Saad (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-03)
      Since the early days of Very Large Scale Integration (VLSI) era, the scaling of gate oxide thickness has been instrumental in controlling the short channel related effects in state-of-the-art device structure, as MOS gate ...

    • Hardware Implementation of Intelligent Traffic Light Controller 

      Noorrashikin Jaafar (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-05)
      Traffic signal controller is playing more and more important roles in modern management and controls of urban traffic to reduce the accident and traffic jam in road. The traffic light controller is a sequential machine ...

    • High speed 8-bits x 8-bits Wallace Tree multiplier 

      Tajul Hamimi Harun (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-05)
      This final year project (FYP) is to analyze the design of Wallace Tree multiplier. For simplicity, unsigned operands are chosen and main focus on the short word widths commonly used in most applications: an 8-bit multiplier. ...

    • High speed six operands 16-bits carry save adder 

      Awatif Hashim (School of Microelectronic Engineering, 2007-03)
      Adders are commonly found in the critical path of many building blocks of microprocessors and digital signal processing chips. The most important for measuring the quality of adder designs in the past were propagation ...

    • Hybrid optical delay and polarization controller 

      Ahmad Farid Firdaus, Yahya (Universiti Malaysia Perlis (UniMAP)School of Microelectronic Engineering, 2011-04)
      The Hybrid Optical Delay and Polarization Controller is a device that combined optical delay and polarization controller. Optical delay is a device to control the optical delay in the fiber and polarization controller is ...

    • Improvement of SiGe HBT Design and Technology Performance using Device Simulation 

      Nurradila Ramlan (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-04)
      Simulation of the effect of various design parameters on the performance of the HBT is essential for obtaining the optimized design. This is based on the requirement for a reliable computation of the HBT performance. ...

    • The influence of the accelerating voltages on the growth of the square structure during Electron Beam Induced Deposition (EBID) method 

      Muhammad Afiq Abdul Aziz (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2008-04)
      Electron beam induced deposition (EBID) is a method for high-resolution direct material deposition from the gas phase in the Scanning Electron Microscopy (SEM) onto a substrate. In this project, EBID method has been used ...

    • Intelligent environment friendly rest room system 

      Nor Alina, Khairi (Universiti Malaysia Perlis (UniMAP)School of Microelectronic Engineering, 2011-03)
      A public toilet is very important especially for the passerby. Nowadays, the rest room had been included with high-tech equipments and facilities in order to increase the user’s ease and comfort. The equipments and ...

    • Investigation and Modeling of Boron Diffusion Reduction in Silicon by Flourine Implantation using Numerical Simulation 

      Chuah Soo Kiet (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-05)
      With the increased interest in the use of fluorine co-implantation with boron for boron diffusion reduction in the fabrication of semiconductor devices, it is important to understand the mechanisms by which fluorine ...

    • K-Mean clustering simulation using C programming 

      Mohammad Isa, Ahmad Azan (Universiti Malaysia Perlis (UniMAP)School of Microelectronic Engineering, 2011-06)
      At present, an analysis of the data or information is important in determining or divides into several clusters. Clustering method is one way how to analyze the static data that is used in various fields, including machine ...

    • Line follower robot 

      Azuwan Harom (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2008-04)
      This project is to create a robot that will follow a black line on white surface with microcontroller PIC16F877A to control the robot movements. This project is divided into two parts that electronic system and software. ...