dc.contributor.author | Mohd Amirul Hazwan Mohd Amin | |
dc.date.accessioned | 2008-10-09T13:46:16Z | |
dc.date.available | 2008-10-09T13:46:16Z | |
dc.date.issued | 2008 | |
dc.identifier.uri | http://dspace.unimap.edu.my/123456789/2358 | |
dc.description | Access is limited to UniMAP community. | en_US |
dc.description.abstract | The design and concept of mushroom house where can be maintain at 24°c were
investigated by using the principle of heat transfer. The water was pumped from the tank to dome roof and flow through the pipe on the both side of the roof to the ditch at the roof side. Then the water flow down to the ditch at the ground through 6 vertical pipe at the both side of the mushroom house and finally go back to the tank and it will cycling continuously. The additional blower were add at the back of the house to ensure it can absorb out the hot air in the house. | en_US |
dc.language.iso | en | en_US |
dc.publisher | Universiti Malaysia Perlis | en_US |
dc.subject | Mushroom house | en_US |
dc.subject | Mushroom house -- Design and construction | en_US |
dc.subject | Heat controller | en_US |
dc.subject | Temperature tester | en_US |
dc.subject | Heat -- Transmission | en_US |
dc.subject | Heating | en_US |
dc.title | Temperature reduction in mushroom house using the principle of waterfall | en_US |
dc.type | Learning Object | en_US |
dc.contributor.advisor | Ahmad Humaizi Hilmi (Advisor) | en_US |
dc.publisher.department | School of Manufacturing Engineering | en_US |