Browsing Mohd Shukry Abdul Majid, Assoc. Prof. Ir. Dr. by Issue Date

Now showing items 1-20 of 45

    • Prediction of Reverberation time in university classrooms using Neural Network 

      Paularaj, M. P.; Mohd Shukry, Abdul Majid; Sazali, Yaacob; Hariharan, M.; Wan Mohd Ridzuan, Wan Ab Majid (Universiti Kebangsaan Malaysia, 2007)
      Reverberation time is fundamental to the study of the acoustics of an enclosed space. An important objective of architectural acoustics is to predict the reverberation time in an enclosed space. Reverberation time is also ...

    • The effects of varying target hardness on ricochet angle 

      Mohd Shukry, Abdul Majid; Birch, Robert S.; Jais, M. I. (American Institute of Physics, 2007-05-09)
      This project is a study on ricochet characteristics off wooden targets when fired upon by 22 calibre bolt action rifle. A series of experimental testing has been carried out on three different woods chosen to give range ...

    • Motorbike engine faults diagnosing system using neural network 

      Paulraj, Murugesa Pandiyan, Prof. Dr.; Mohd Shukry, Abdul Majid, Dr.; Sazali, Yaacob, Prof. Dr.; Zin, M.Z.M. (IEEE Conference Publications, 2008-12)
      Monitoring systems for motorbike industry requires high and efficient degree of performance. In recent years, automatic identification and diagnosis of motorbike engine faults has become a very complex and critical task. ...

    • Statistical time energy based damage detection in steel plates using artificial neural networks 

      Paulraj, Murugesa Pandiyan, Prof. Madya; Mohd Shukri, Abdul Majid; Sazali, Yaacob, Prof. Dr.; Mohd Hafiz, Fazalul Rahiman; Krishnan, R. P. (Institute of Electrical and Elctronics Engineering (IEEE), 2009-03-06)
      In this paper, a simple method for crack identification in steel plates based on statistical time energy is presented. A simple experimental procedure is also proposed to measure the vibration at different positions of a ...

    • Damage detection in steel plates using artificial neural networks 

      Paulraj, Murugesa Pandiyan, Prof. Madya; Mohd Shukri, Abdul Majid; Sazali, Yaacob, Prof. Dr.; Mohd Hafiz, Fazalul Rahiman; Krishnan, R. P. (Institute of Electrical and Electronics Engineering (IEEE), 2009-06-04)
      In this paper, a simple method for crack identification in steel plates based on frame energy based Discrete Cosine Transformation (DCT) is presented. A simple experimental procedure is also proposed to measure the vibration ...

    • Damage detection in steel plates using discrete cosine transformation techniques and artificial neural network 

      Paulraj, M.P.; Mohd Shukry, Abdul Majid; Sazali, Yaacob; Mohd Hafiz, Fazalul Rahiman; R Pranesh, Krishnan (Universiti Malaysia Perlis, 2009-10-11)
      In this paper, a simple method for crack identification in steel plates based on the Frame Energy based Discrete Cosine Transformation [DCT] moments is presented. A simple experimental procedure is also proposed to measure ...

    • Structural steel plate damage detection using DFT spectral energy and artificial neural network 

      Paulraj, Murugesa Pandiyan, Prof. Madya Dr.; Mohd Shukri, Abdul Majid; Sazali, Yaacob, Prof. Dr.; Abdul Hamid, Adom, Prof. Madya Dr.; Krishnan, Pranesh R. (Institute of Electrical and Electronics Engineers (IEEE), 2010-05-21)
      In this paper, simple methods for crack identification in steel plates and their classification based on the frame based frequency domain features is presented. Based upon the boundary conditions and experimental modal ...

    • Qualification and lifetime modelling of fibreglass pipe 

      Gibson, Arthur Geoff; Mohd Shukry, Abdul Majid, Dr.; Assaleh, T. A.; Hale, Jack Michael; Fahrer, A.; Rookus, C. A P; Hekman, M. (Maney Publishing, 2011-03)
      Procedures for qualifying fibreglass pipes are discussed here in relation to industry needs. The ultimate elastic wall stress (UEWS) test appears to provide an efficient means of rating pressure pipe, and indeed vessels, ...

    • Ultimate elastic wall stress (UEWS) test of glass fibre reinforced epoxy (GRE) pipe 

      Mohd Shukry, Abdul Majid; Assaleh, T. A.; Gibson, A. G.; Hale, J. M.; A., Fahrer; Rookus, C. A. P.; M., Hekman (Elsevier Ltd., 2011-10)
      This paper presents an experimental investigation of the behaviour of filament wound glass fibre reinforced epoxy (GRE) composite pipe under hydrostatic and biaxial load conditions at temperatures up to 95 °C. The format ...

    • Kuin not facing problems, says Azizan 

      Embun, Majid (The Star, 2012-09-27)

    • Structural steel plate damage detection using non destructive testing, frame energy based statistical features and artificial neural networks 

      Paulraj, Murugesa Pandiyan, Dr.; Sazali, Yaacob, Prof. Dr.; Mohd Shukry, Abdul Majid; Mohd Nor Fakhzan, Mohd Kazim; Pranesh, Krishnan (Malaysian Technical Universities Network (MTUN), 2012-11-20)
      This paper discusses about the detection of damages present in the steel plates using nondestructive vibration testing. A simple experimental model has been developed to hold the steel plate complying with the simply ...

    • Application of frame energy based DCT moments for the damage diagnosis in steel plates using FLNN 

      Paulraj, Murugesa Pandiyan, Prof. Dr.; Sazali, Yaacob, Prof. Dr.; Mohd Shukry, Abdul Majid, Dr.; Krishnan, Pranesh (IEEE Conference Publications, 2012-12)
      This paper discusses the application of frame energy based Discrete Cosine Transformation (DCT) moment features for the detection of damages in steel plates. A simple experimental model is devised to suspend the steel ...

    • Mathematical model of elastic crack interaction and two-dimensional finite element analysis based on Griffith energy release rate 

      Ruslizam, Daud, Dr.; Ahmad Kamal Ariffin, Mohd. Ihsan, Prof. Dr.; Shahrum, Abdullah, Prof. Dr.; Mohd Shukry, Abdul Majid, Dr.; Mohd Afendi, Rojan, Dr. (Trans Tech Publications, 2013)
      Stress shielding interaction effect of two parallel edge cracks in finite body under uniaxial loading is analysed using developed finite element (FE) analysis program. In present study, the stress shielding interaction is ...

    • Experimental investigation of PCM spheres in thermal energy storage system 

      Nasrul Amri, Mohd Amin, Dr.; Azizul, Mohamad; Mohd Shukry, Abdul Majid, Dr.; Mohd Afendi, Rojan, Dr.; Bruno, Frank, Dr.; Belusko, Martin (Trans Tech Publications, 2013)
      This paper presents the experimental result of a small scale packed bed of random spheres with encapsulated PCM being charged and discharged. A vapor compression refrigerator and heated room with fan heater were used to ...

    • Experimental studies of a Ranque-Hilsch vortex tube 

      Azizul, Mohamad; Nasrul Amri, Mohd Amin; Zuradzman, Mohamad Razlan; Mohd Shukry, Abdul Majid (Trans Tech Publications, 2013)
      Vortex tube is a device that separates a compressed flow of gas into two streams simultaneously, one giving kinetic energy to the other, resulting one hotter than the inlet temperature and one lower, without having any ...

    • Stress analysis and failure characterizations of V-shaped epoxy adhesively bonded joint 

      Mohd Afendi, Rojan, Dr.; Mohd Shukry, Abdul Majid, Dr.; Ruslizam, Daud, Dr.; Ishino, Y.; Teramoto, Tokuo (Trans Tech Publications, 2013)
      This paper deals with stress and failure characteristics of V-shaped epoxy adhesive joint. Effect of scarf angle upon failure morphology was investigated by tensile test and monitoring using high speed camera. V-shaped ...

    • Effects of winding angles in biaxial ultimate elastic wall stress (UEWS) tests of glass gibre reinforced epoxy (GRE) composite pipes 

      Mohd Shukry, Abdul Majid, Dr.; Mohd Afendi, Rojan, Dr.; Ruslizam, Daud, Dr.; Gibson, A. G.; M., Hekman (Trans Tech Publications, 2013)
      This paper presents an experimental investigation into the influence of winding angles in multiaxial ultimate elastic wall stress (UEWS) tests of glass-fibre reinforced epoxy (GRE) composite pipes. Currently, UEWS test is ...

    • Strength prediction and reliability of brittle epoxy adhesively bonded dissimilar joint 

      Mohd Afendi, Rojan, Dr.; Mohd Shukry, Abdul Majid, Dr.; Ruslizam, Daud, Dr.; Abdul Ghaffar, Abdul Rahman, Dr.; Teramoto, Tokuo (Elsevier Ltd, 2013)
      This paper deals with strength and failure prediction as well as reliability issues of adhesive joints of brittle epoxy bonding of two dissimilar adherends. Effects of bond thickness and scarf angle upon the strength of ...

    • Modelling of multi-axial ultimate elastic wall stress (UEWS) test for glass fibre reinforced epoxy (GRE) composite pipes 

      Mohd Shukry, Abdul Majid, Dr.; Mohd Afendi, Rojan, Dr.; Ruslizam, Daud, Dr.; Nasrul Amri, Mohd Amin, Dr.; Azizul, Mohamad; Cheng, Ee Meng, Dr.; Gibson, A. G. (Trans Tech Publications, 2013)
      This paper describes the modeling of multiaxial ultimate elastic wall stress (UEWS) at room temperature for glass fibre reinforced epoxy (GRE) composite pipes. The model developed, predicts the stress-strain response caused ...

    • Effect of adhesive thickness on adhesively bonded T-joint 

      A. R., Abdullah; Mohd Afendi, Rojan, Dr.; Mohd Shukry, Abdul Majid, Dr. (IOP Publishing Ltd, 2013)
      The aim of this work is to analyze the effect of adhesive thickness on tensile strength of adhesively bonded stainless steel T-joint. Specimens were made from SUS 304 Stainless Steel plate and SUS 304 Stainless Steel ...