A study case of dissimilar welding between mild steel ( Low Carbon Steel ) and stainless steel on hardness vickers and tensile shear test for gas tungsten arc welding ( GTAW )
Abstract
This report is about the experimental study on the effects of the dissimilar weld joint design, edge preparation and joint dimension on the weldability of Gas Tungsten Arc Welding ( GTAW ) between mild steel and stainless steel. The analysis that has been used in this experimental is hardness Vickers test and tensile shear test to determine the hardenability and strengthened of the welding joint. The joint that been used is Butt Weld joint and with three edge
preparation such as square edge, single V edge and single bevel edge. To observe the effect of hardness on the joints three area were carried out which is parent metal, heat affected zone (HAZ) and weld metal area for hardness testing. From the result obtained, it was found that the maximum load of tensile shear test is increases when it depends on the edge preparation and weld joint design. The best joint for this dissimilar welding is the Single V type.
Collections
Related items
Showing items related by title, author, creator and subject.
-
Mechanical properties of dissimilar welds between stainless steel and mild steel
Shamsul Baharin, Jamaludin, Prof. Dr.; Mazlee, Mohd Noor, Dr.; Shahzan Kamarul, A. Kadir; Khairel Rafezi, Ahmad, Dr. (Trans Tech Publications, 2013)Joining of stainless steel type 304 to mild steel was carried out using a gas tungsten arc welding (GTAW). Samples were welded using stainless steel welding electrode: (AWS: E308l-16) and mild steel welding electrode: (AWS: ... -
Classification of stainless steel and mild steel using vibration technique
Intan Maisarah, Abd Rahim (Universiti Malaysia Perlis (UniMAP)School of Mechatronic Engineering, 2011)The production of material in industry must attain some standard such as the standard required by American Society for Testing and Materials (ASTM) International. The requirement of the material standard is important in ... -
Properties of steel fiber reinforced concrete with different length of steel fiber
Nik Suharliza, Nik Zol (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2014-06)Currently in concrete technology is booming to improve the quality and properties of concrete. There are various additives that can strengthen the concrete. Additional materials include the use of steel fibers into the ...