dc.contributor.author | Muhamad Syazwan Abdul Manan | |
dc.date.accessioned | 2008-11-26T05:07:22Z | |
dc.date.available | 2008-11-26T05:07:22Z | |
dc.date.issued | 2008-05 | |
dc.identifier.uri | http://dspace.unimap.edu.my/123456789/3350 | |
dc.description.abstract | In the present investigation, Aluminum-tin slag composite have been produced by powder
metallurgy (P/M) route. Aluminum (Al) and tin slag were undergo milling and sieving
process where particle size <75 µm and <63 µm for tin slag and aluminum were obtained.
Both Al and tin slag were mixed for 40 minutes with a speed of 100rpm. Both of the Al and tin slag powder were mixed by weight percent which is Al-5% of tin slag, Al-10% of tin slag, Al-15% of tin slag and Al-20% of tin slag correspond to sample A, B, C, D
respectively. Samples were compacted with the load of 5 tonne (180 Mpa) for 3 minutes.
The samples were placed in a tube furnace with nitrogen, N2 purified atmosphere at 600oC for 7 hours soaking time, with heating and cooling rate of 5oC/ min for 1 hour and 9
minutes respectively. Mechanical properties like shrinkage, hardness, density and porosity of Al-tin slag composite were investigated. All the samples experienced shrinkage. In increase addition of tin slag, hardness and density value was also increased. % of porosity decreased with the increased addition of tin slag. Microstructures of Al-tin slag composite
were also investigated. The microstructure of this Al-tin slag composite shows a uniform
distribution of tin slag in the Al matrix. | en_US |
dc.language.iso | en | en_US |
dc.publisher | Universiti Malaysia Perlis | en_US |
dc.subject | Aluminum | en_US |
dc.subject | Aluminum composites | en_US |
dc.subject | Aluminum -- Mechanical properties | en_US |
dc.subject | Powder metallurgy | en_US |
dc.subject | Tin slag | en_US |
dc.subject | Aluminum matrix composite | en_US |
dc.title | Study of fabrication Al-Tin slag composite by powder metallurgy method | en_US |
dc.type | Learning Object | en_US |
dc.contributor.advisor | Mohd Fitri Mohamad Wahid (Advisor) | en_US |
dc.publisher.department | School of Materials Engineering | en_US |