Shamsul Baharin Jamaludin, Prof. Dr.: Recent submissions

Now showing items 21-40 of 87

    • Development of dense hydroxyapatite-ni by modified electroless deposition technique. 

      Sri Asliza, Md Amin; Mohd Zaheruddin, Kasmuin; Azmi, Rahmat, Dr.; Shamsul Baharin, Jamaludin, Prof. Dr.; Khairel Rafezi, Ahmad, Dr. (Trans Tech Publications, 2014)
      Ni deposited on HA powder was prepared by electroless plating process without sensitization and activation treatment. The deposited powder obtained was characterized by energy dispersive spectroscopy (EDX) and x-ray ...

    • The effects of fly ash and polystyrene bead additions on compressive strength of foamed cement composites 

      Mazlee, Mohd Noor, Dr.; Key, Tan Pei; Shamsul Baharin,  Jamaludin, Prof. Dr.; Roshasmawi, Abdul Wahab; Nur Izzati, Muhd Nadzri; Alida, Abdullah (Trans Tech Publications, 2013)
      The effects of both additions of fly ash and polystyrene (PS) beads were studied on compressive strength of foamed cement composites. The increasing amount of fly ash addition up to 6 wt. % has been found to increase the ...

    • The need to intensify research efforts in the alternative to lead shot 

      Baba Gowon; Kahtan S., Mohammed, Dr.; Shamsul Baharin, Jamaludin, Prof. Dr.; Alida, Abdullah (Trans Tech Publications, 2014)
      The problem of lead poisoning resulting from the use of lead shot in hunting waterbirds and shooting sports has led to the partial ban, voluntary restriction and complete ban of lead shot in some countries. The ban resulted ...

    • Preparation and characterization of Co-HA powder using modified electroless method 

      Mohd Zaheruddin, Kasmuin; Sri Asliza, Md Amin; Azmi, Rahmat, Prof. Madya Dr.; Shamsul Baharin, Jamaludin, Prof. Dr.; Khairel Rafezi, Ahmad, Dr. (Trans Tech Publications, 2014)
      C0-HA composite produced by simple electroless deposition method was studied. From the particle size analysis by Malvern particles analyzer its shows that 19% increment in average of the particle size powder increase after ...

    • Response of functionality graded hydroxyapatite/F-75 in saline solution 0.9% NaCl 

      Noorazimah, Mohd Ab Llah; Shamsul Baharin,  Jamaludin, Prof. Dr.; Nur Hidayah, Ahmad Zaidi (Trans Tech Publications, 2013)
      Functionally graded hydroxyapatite (HAP) /F-75 was fabricated using powder metallurgy technique. Samples fabricated were tested inside 0.9% NaCl to check their bioactivity reaction. After immersed, samples were analyzed ...

    • Effect of space holder and compaction pressure on the porosity of sintered copper 

      Shamsul Baharin, Jamaludin, Prof. Dr.; Chong, Xin Yi; Alida, Abdullah; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr. (Trans Tech Publications, 2013)
      The effect of space-holder content on the porosity of sintered copper that was fabricated by powder metallurgy technique has been investigated. Carbamide was used as space-holder and the content selected was 10 wt. %, 20 ...

    • Characterization of porous aluminum fabricated via sintering- dissolution process (SDP) 

      Shamsul Baharin,  Jamaludin, Prof. Dr.; Nik Mohd Fikry, Mohd Rushdi; Alida, Abdullah; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr. (Trans Tech Publications, 2013)
      Porous metals that have open pores structure with low density and light weight properties are suitable to be used in many engineering applications. In this work, the porous aluminum was fabricated via sintering dissolution ...

    • Mechanical properties of dissimilar welds between stainless steel and mild steel 

      Shamsul Baharin,  Jamaludin, Prof. Dr.; Mazlee, Mohd Noor, Dr.; Shahzan Kamarul, A. Kadir; Khairel Rafezi, Ahmad, Dr. (Trans Tech Publications, 2013)
      Joining of stainless steel type 304 to mild steel was carried out using a gas tungsten arc welding (GTAW). Samples were welded using stainless steel welding electrode: (AWS: E308l-16) and mild steel welding electrode: (AWS: ...

    • Effect of spot welding current and cycles on the mechanical properties of welded galvanized steel sheets 

      Shamsul Baharin,  Jamaludin, Prof. Dr.; Mazlee, Mohd Noor, Dr.; Muhammad Rifki, Ismail; Khairel Rafezi, Ahmad, Dr.; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr. (Trans Tech Publications, 2013)
      Studies on the effects of welding current and cycles were carried on the galvanized steel sheets using spot welding. The welding currents used were 3 kA, 5 kA 6 kA and the welding cycles were 4, 6 and 8. Tensile shear and ...

    • Fabrication and characterization of porous F-75 for potential application in tissue engineering 

      Shamsul Baharin,  Jamaludin, Prof. Dr.; Tan, Wei Leng; Nur Hidayah, Ahmad Zaidi; Zuraidawani, Che Daud; Mazlee, Mohd Noor, Dr. (Trans Tech Publications, 2013)
      Porous F-75 (Co-Cr-Mo) was produced by powder metallurgy technique. F-75 powder was mixed with space holder and compacted using different pressures (300 MPa, 350 MPa, 400 MPa, 450 MPa). The green samples were sintered at ...

    • Microstructure and interface analysis of glass particulate reinforced aluminum matrix composite 

      Shamsul Baharin,  Jamaludin, Prof. Dr.; Hadipramana, Josef; Mohd Fitri, Mohamad Wahid; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Azmi, Rahmat, Prof. (Trans Tech Publications (TTP), 2013)
      A characterization of microstructure and interface was made on the composites Al- 4% Cu reinforced with 15 wt. % glass particulate. The composite was fabricated by powder metallurgy followed by solution treatment and ...

    • Effect of beta tricalcium phosphate (β-TCP) on properties of Mg-Zn composites 

      Siti Aisyah, Buyong; Shamsul Baharin, Jamaludin, Prof. Dr.; Rohaya, Abdul Malek (Trans Tech Publications, 2014)
      In this work, Mg and Zn powder were used to prepare the Mg-Zn/β-TCP composites with different β-TCP composition by using powder metallurgy technique. The composite were mixed using ball mill and compacted at 500 MPa. The ...

    • Sustainable porous materials for gas adsorption applications; A concise review 

      Wai, Hoong Chan; Mazlee, Mohd Noor, Dr.; Zainal Arifin, Ahmad, Prof.; Shamsul Baharin,  Jamaludin, Prof. Dr.; Mohd Azlan, Mohd Ishak, Prof. Madya Dr; Muhammad Shahar, Jusoh, Dr. (Trans Tech Publications, 2013)
      Many new sustainable porous materials were developed for gas adsorption applications. Common materials such as activated carbon, clay materials and metal organic framework (MOF) that utilized as potential porous adsorption ...

    • The corrosion studies of powder metallurgy Co-Cr-Mo (F-75) alloy 

      Zuraidawani, Che Daud; Shamsul Baharin, Jamaludin, Prof. Dr.; Mohd Nazree, Derman, Dr.; Juyana, A Wahab          (AENSI Publisher All rights reserved, 2013-10)
      Co-Cr-Mo (F-75) alloy was investigated for biomedical application due to its mechanical properties and good corrosion resistance. This study has been focusing on the corrosion behavior of PM Co-Cr-Mo alloy. The Co-Cr-Mo ...

    • Microstructure and in-vitro test bioactivity behavior of Co-Cr-Mo (F-75)/hydroxyapatite in phosphate buffered saline solution 

      Shamsul Baharin, Jamaludin, Prof. Dr.; Nur Maizatul Shima, Adzali; Mohd Nazree, Derman, Dr. (Technical University of Košice, 2014)
      Cobalt based alloys were the first metallic materials successfully used in orthopedic applications. However, these alloys are bioinert, it is necessary to make them bioactive in the human body to improve their application ...

    • Optimization of sintering temperature on microwave sintering of the composite iron-chromium reinforced with alumina particles 

      Wan Abdul Rahman Assyahid, Wan Ibrahim; Shamsul Baharin, Jamaludin, Prof. Dr.; Mazlee, Mohd Noor, Dr. (Trans Tech Publications, 2014-01)
      Microwave sintering technology has become attractive and gained interest among material researchers due its capability and advantages over conventional sintering. Since two decades ago, intensive researches on microwave ...

    • Innovative Metal injection molding (MIM) method for producing CoCrMo alloy metallic prosthesis for orthopedic applications 

      Mohd Afian, Omar; Shamsul Baharin, Jamaludin, Prof. Dr.; Nurazilah, Mohd Zainon; Norazlan, Roslani; Mohd Nizam, Abd Jalil; Mohd Bakri, Mohd Hijazi; Ahmad Zahid, Omar; Noorsyakirah, Abdulah (Trans Tech Publications, 2014-01)
      Powder injection molding (PIM) is a powder metallurgy process currently used for the production of complicated and near net shape parts of high performance materials [. This technique basically combines the advantages of ...

    • Effect of sintering on the physical and mechanical properties of Co-Cr-Mo (F-75)/HAP composites 

      Nur Maizatul Shima, Adzali, Dr.; Shamsul Baharin, Jamaludin, Prof. Dr.; Mohd. Nazree, Derman, Dr. (Universiti Kebangsaan Malaysia, 2013-12)
      This paper reports on the effects of HAP addition and sintering temperature on the microstructure and properties of the F-75/HAP composites fabricated by powder metallurgy. Co-Cr-Mo (F-75) is used in orthopedics because ...

    • Mechanical properties and wear behavior of brake pads produced from palm slag 

      Che Mohd Ruzaidi, Ghazali; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Shamsul Baharin, Jamaludin, Prof. Dr.; Mohd Mustafa Al Bakri, Abdullah; Rafiza, Abdul Razak (Trans Tech Publications, 2012)
      Brake pads are important safety devices in vehicles. An effort to avoid the use of asbestos in brake pads has led to the development of asbestos-free brake pads that incorporate various organic and inorganic fillers. Palm ...

    • Microwave sintering of pure iron with addition of stearic acid as binder 

      Wan Abdul Rahman Assyahid, Wan Ibrahim; Shamsul Baharin, Jamaludin, Prof. Dr.; Mazlee, Mohd Noor, Dr. (Trans Tech Publications, 2012)
      The purpose of this study is to investigate the effect of the stearic acid as binder in sintering pure iron using a microwave furnace. The study was focused in mechanical properties such as porosity, density and micro-hardness ...