Browsing Dewi Suriyani Che Halin, Dr. by Title
Now showing items 1-20 of 21
-
Characterization of Cu2O thin films with addition of additive prepared by sol-gel spin coating process
(Universiti Putra Malaysia, 2010)Cuprous Oxide (Cu2O) thin films were formed onto indium tin oxide (ITO) coated glass substrate by sol-gel spin coating technique using different additives namely polyethylene glycol and ethylene glycol. It was found that ... -
Characterization of cuprous oxide thin films on n-Si substrate prepared by sol-gel spin coating
(MASS Malaysia, 2008)Cuprous oxide films were successfully grown onto a n-Si substrate with (100) orientation via sol-gel spin-coating method at room temperature in air followed by annealing in 5% H2 + 95% N2 atmosphere. The annealed temperatures ... -
Cuprous oxide thin films for a photoelectrochemical cell of ITO/Cu 2O/PVC-LiClO 4/graphite
(Trans Tech Publications Inc., 2012)Cuprous oxide (Cu 2O) thin films were formed onto indium tin oxide (ITO) coated glass substrate by sol-gel spin coating technique using different additives namely polyethylene glycol and ethylene glycol. It was found that ... -
Effect of annealing atmosphere on the morphology of copper oxide thin films deposited on TiO₂ substrates prepared by sol-gel process
(Trans Tech Publications, 2014)Copper oxide films were prepared via sol-gel like spin coating starting from methanolic solutions of cupric chloride onto the TiO₂ substrates. Films were obtained by spin coating under room conditions (temperature, 25-30 ... -
Effect of graphene oxide on microstructure and optical properties of TiO₂ thin film
(IOP Publishing Ltd, 2019-12)GO/TiO₂ thin films have been synthesized from titanium (IV) isopropoxide (TTIP) by a sol-gel method. The films were deposited onto a glass substrate using spin coating deposition technique then were subjected to annealed ... -
The effect of spin coating rate on morphology and optical properties of cuprous oxide thin film prepared by sol-gel technique
(Australian Ceramic Society, 2010)Cuprous oxide thin films were successfully grown on indium tin oxide (ITO) coated glass by sol-gel spin coating using diethanolamine (DEA) as a solubility agent. The films were annealed at 350 °C in 5% H2 + 95% N 2 atmosphere. ... -
The effect of thermal annealing on the microstructure and mechanical properties of Sn-0.7Cu-xZn solder joint
(MDPI AG, 2021-02)The microstructural properties of a Pb-free solder joint significantly affect its mechanical behaviours. This paper details a systematic study of the effect of the annealing process on the microstructure and shear strength ... -
Graphene geopolymer hybrid: a review on mechanical properties and piezoelectric effect
(IOP Publishing Ltd, 2019-08)A review on graphene geopolymers hybrid is presented, focusing on the mechanical properties and piezoelectric effect. The method and way of mixing graphene with geopolymers are discussed, including form of graphene that ... -
Green synthesis of silver nanoparticles using local honey
(Trans Tech Publications, 2013-05)In this work, silver nanoparticles have been successfully prepared with a simple, cost-effective and reproducible aqueous room temperature green synthesis method. Honey was chosen as the eco-friendly reducing and stabilizing ... -
Mechanism of current transport for a photoelectrochemical cells of ITO/Cu2O/PVC-LiClO4/graphite
(Trans Tech Publications, 2013)This paper deals with the current transport mechanism of solid state photoelectrochemical cells of ITO/Cu2O/PVC-LiClO4/graphite as well as the physical properties of a component of a device affecting its performance. The ... -
Mesoporous structure of doped and undoped PEG on Ag/TiO₂ thin film
(IOP Publishing Ltd, 2019-08)In this reaserch, photocatalyst silver titanium dioxide was doped and modified by Polyethylene Glycol (PEG). The purpose of the present study was to analyse the synthesized Ag/TiO₂ thin film doped and undoped PEG. Ag/TiO₂ ... -
Microstructural studies of doped PEG Ag/TiO₂ thin film
(IOP Publishing Ltd, 2019-12)Ag/TiO₂ thin film was prepared by the sol-gel method through the hydrolysis of titanium tetraisopropoxide and silver nitrate solution. Various amount of PEG was doped into the solution preparation to study the effect on ... -
Microstructure and wettability of Graphene Oxide/TiO2 thin film prepared via sol-gel method
(IOP Publishing Ltd, 2019-08)The microstructure of graphene oxide TiO2 (GO/TiO2) films on wettability and morphology properties were studied at different amount of Titanium isopropoxide with fixed amount of GO. GO/TiO2 thin films were prepared by using ... -
Microstructure evolution of Ag/TiO₂ thin film
(MDPI AG, 2021-01)Ag/TiO₂ thin films were prepared using the sol-gel spin coating method. The microstructural growth behaviors of the prepared Ag/TiO₂ thin films were elucidated using real-time synchrotron radiation imaging, its structure ... -
Microstructures study on cuprous oxide thin films deposited on different substrates by using sol-gel technique
(Scientific.Net/Trans Tech Publications, 2012-12)Cuprous oxide (Cu₂O) thin films were formed onto three different substrates such as indium tin oxide (ITO) coated glass, titanium oxide (TiO₂) and n-Si substrates by sol-gel spin coating technique. It was found that the ... -
Overview of pathogenic micro-organisms destruction in contaminated water by oxide photocatalysis
(Trans Tech Publications, 2013)The titanium dioxide (TiO2) is a semiconductor oxide photocatalys, which is chemically and biologically inert but exhibits excellent photolytic activity in the ultraviolet (UV) region. Progress in photocatalytic water ... -
Physical properties of cuprous oxide thin films grown on n-Si substrate by sol-gel spin coating
(Penerbit Universiti Kebangsaan Malaysia (UKM), 2009)Cu2O films were grown on n-Si substrates via the sol-gel spin-coating method. The films were annealed under 5% H2 + 95% N2 atmosphere at 350°C, 450°C and 550°C. Diffractogram obtained by the grazing angle x-ray diffractometry ... -
Preparation of photoelectrochemical cell of ITO/Cu2O/PVC-LICLO4/graphite using Cu2O films as an active layer
(Trans Tech Publications, 2014)Cuprous oxide (Cu2O) thin films were successfully grown on indium tin oxide (ITO) coated glass by sol-gel spin coating using diethanolamine (DEA) as a solubility agent. The films were annealed at 350 °C in 5% H2 + 95% N2 ... -
Recent graphene oxide/TiO₂ thin film based on self-cleaning application
(IOP Publishing Ltd, 2019-08)Graphene oxide/TiO₂ (GO/TiO₂) thin films works as self-cleaning device have been developed in various method onto selected substrates. It was noticeable that graphene oxide is the best form in the group of graphene family. ... -
Synthesis and characterization of TiO₂/SiO₂ thin film via SolGel method
(IOP Publishing Ltd, 2017-06)TiO₂/SiO₂ thin films were prepared by sol-gel spin coating method. Structural, surface morphology and optical properties were investigated for different annealing temperatures at 300°C, 400°C and 500°C. X-ray diffraction ...