Browsing School of Materials Engineering (FYP) by Issue Date
Now showing items 1-20 of 256
-
Conductive coating strategy for Magnesium alloy as a surface protection and reliability
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008)The methods and technologies in various coatings for magnesium alloys are studied. The magnesium alloy used in this final year project is AZ91D, which is still in very early using stages in semiconductor industry. This ... -
Corrosion study on welded mild steel in soil environment
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-03)This study was carried out to determine the corrosion behavior of welded mild steel in soil environment. The welding process was done by arc welding method at 70, 80, 90, 100 and 110 ampere. The corrosion behavior of welded ... -
Effect of particle size and milling process on the microstructure and thermal properties of Copper Silicon Carbide (CuSiC) composites for electronic packing application
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-03)Shrinking size and increasing functionality of IC device has induced serious thermal problem. Good thermal dissipation, light weight and easy-to-process material, such as CuSiC, is a highly potential heat spreader material ... -
Aging effect of Sn-Ag-Cu lead free solder
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-03)Many issue related to the performance of lead free solder alloys have arisen. So, it should be take concern on it and one of the method is by studying the microstructure of those solder alloys. This because their mechanical ... -
Preparation of Photoresponse n-TiO2 for hydrogen and oxygen evolution reactions in an electrochemical cell
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-03)Today, energy crisis triggered by depletion and pollution aspect of fossil fuels, has urged the need to search of clean and renewable energy, which can effectively substitute petroleum. The use of hydrogen as an environmentally ... -
Analyze the quality Magnesium – aluminium binary alloy concerning its flowability, tensile strength and hardness with various types of moulds
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-03)This final year project is based on analyze the quality of magnesium – aluminium alloy products concerning of its flowability, tensile strength and hardness with various types of moulds. The mentioned method of molds is ... -
The production of fly ash aggregates
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-03)This aim of study is to characterize the physical properties manufactured aggregates that produces from waste, which is fly ash. In this study an attempt has been made to find the suitability of the fly ash waste and ... -
Extraction of Copper from Aqueous Sulfate medium using microcapsule coated with Cyanex 301
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-03)The copper extraction with the microcapsules containing Cyanex 301 which prepared by solvent evaporation method was study. Gum arabic as dispersion stabilizer and dichloromethane as solvent are used in microcapsules ... -
Effect of solution treatment period on Magnesium anode in soil environment
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-03)The aim of this study is to determine the effect of heat treatment on the corrosion rate using immersion test in soil and backfill environment. Samples were heat treated at 300°C for 3, 6 and 9 hours in high temperature ... -
Corrosion behavior of copper base alloy In present of straits Of Malacca seawater
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-03)The corrosion behavior of C2801 brass in presence of Straits of Malacca seawater , collected from different locations which are Klebang (Malacca), Tanjung Kling (Malacca), Tanjung Emas (Johore), Kuala Perlis (Perlis) and ... -
Lattice Imperfections in Intermetallic Ti-Al alloys: an X-Ray Diffraction study of the microstructure by the Rietveld method
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-03)Microstructure in intermetallic Ti-Al alloys with compositions of Al= 45, 50, 55, and 60% in the homogenized bulk states has been extensively studied using Rietveld whole X-ray profile fitting technique, adopting the ... -
Preliminary study on bagasse fiber with Polystyrene as polymer composites
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-03)The interest in long term sustainability of material resources has make advancements in bio-composites or else name as polymer composite materials which made from natural fibers and resins. Natural fibers reinforced with ... -
Study on differentiation of tensile and Ultrasonic modulus of Highway Guardrail
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-03)The aim of this study is to determine the differentiation of Young’s modulus between conventional tensile technique and ultrasonic technique. Highway guardrail used as a sample in this study was courtesy by highway concession. ... -
Influence of H2 SO4 solution on formation of porous AAO thin film
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)The fabrication of self-ordered anodic aluminum oxide (AAO) by anodization of Al foils and pure aluminum in sulfuric acid solution was investigated. The influences of anodizing variables, such as applied voltage, the ... -
A study of Kaolin as partial replacement in producing concrete brick
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)During the nature disaster such as Tsunami, earth quake and flooding, many houses were collapsed and need to be developed back in short time. But the requirement of construction material especially brick or block in one ... -
Fabrication and characterization of Ceramic Porcelain tiles
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)Fabrication of ceramic tiles requires detailed attention on the processing parameters such as raw material size and weight percentage, forming and drying process, and sintering temperature. The scope of the project is to ... -
The influence of welding parameters and corrosive environment on the joint strength of resistance spot-welded mild steel sheets
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)In the present work, mild steel sheets consisting two batches were welded by resistance spot welding at different welding parameters and exposed under different environments. The 5% sodium chloride brine was used in the ... -
Influence of H2C204 solution on formation of Porous AAO thin film
(Universiti Malaysia PerlisSchool of Material Engineering, 2008-04)The anodizing of aluminium has been investigated with the aim to realize nano-porous structures and nano-porous oxides for use as nano-templates. Before undergoing electrochemical oxidation, aluminium samples were cleaned ... -
Recovery of Copper (Cu) from printed circuit board (PCB) using LAKOS separator
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)Printed Circuit Board (PCB) scrap has a metal content of nearly 28%, including an abundance of nonferrous metals such as copper, lead and tin. The purity of precious metals in PCBs is more than 10 times that of content-rich ... -
Synthesis and characterization of Fe-Al alloy with different sintering temperature
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)The iron aluminides Fe3Al and FeAl3 have been among the most widely studied intermetallics because of their low cost, low density, good wear resistance, ease of fabrication and resistance to oxidation and corrosion. A ...