Browsing School of Materials Engineering (FYP) by Title
Now showing items 1-20 of 256
-
Adsorption of heavy metal ions by using magnetite nanoparticles
(Universiti Malaysia Perlis (UniMAP), 2017-06)This thesis outlines the study of an adsorption of heavy metal ions by magnetite nanoparticles. Magnetite nanoparticles were synthesized from five different concentration of ferrous sulfate heptahydrate, FeSO4.7H2O as iron ... -
Aging effect of Sn-Ag-Cu lead free solder
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-03)Many issue related to the performance of lead free solder alloys have arisen. So, it should be take concern on it and one of the method is by studying the microstructure of those solder alloys. This because their mechanical ... -
Agricultural residues as Precursors for activated carbon production (coconut waste)
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-05)Coconut meal and coconut shell were characterized to know the suitability to become the activated carbon precursors. Besides the low cost and decrease the market waste, this attempt was made to produce an alternative ... -
Agricultural residues as Precursors for activated carbon production (rice husk)
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)Rice husk because of low cost raw material and it activated form can be used as carbon precursor as a solution to reduce the agricultural waste. An effort was made to produce an activated carbon precursor from the rice ... -
Alginate beads for photodegradation of dye under solar light irradiation
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-06)Photocatalytic degradation of organic pollutants with the aids of semiconductor engrossed massive attention in wastewater treatment recently. Zinc oxide (ZnO) and titanium dioxide (TiO2) are the most utilized semiconductors ... -
Analysis of binary aluminium tin products with varying compositions and optimum flowability, tensile strength and hardness
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)Aluminium tin forms have applications in automobiles and electronic industries. The demand for these materials has been growing at a fast pace from several decades. It is therefore desirable that these materials are produced ... -
Analysis of Binary Aluminium-Magnesium products with varying composition and optimum flowability, tensile strength and hardness
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)Casting is a process that can produce a complex and complicated component. This final year project is to investigate how far the influence on mechanical properties and microstructure of varying aluminium-magnesium alloy ... -
Analyze the quality Magnesium – aluminium binary alloy concerning its flowability, tensile strength and hardness with various types of moulds
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-03)This final year project is based on analyze the quality of magnesium – aluminium alloy products concerning of its flowability, tensile strength and hardness with various types of moulds. The mentioned method of molds is ... -
Analyze the quality of Tin-Aluminium binary alloy products concerning of its flowability, tensile strength, and hardness using various types of moulds
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)Tin-aluminium binary alloy is a type of alloy that improve the strength properties of tin. As we know, tin is a type of metal that randomly used in constructive application. So, combined with aluminium, a new type of alloy ... -
The anodizing of sintered Mg/Ca alloys
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-06)This project is focusing on the effect of anodizing on the sintered Mg/Ca alloys. The Mg/Ca alloy was fabricated using powder metallurgy method. The Mg powder was mixed with 1 wt.% Ca powder using rotating mill with ball ... -
Anodizing process of Mg alloy using low potential
(Universiti Malaysia Perlis (UniMAP), 2017-04)This project is focusing on the effect of anodizing on the coating Mg alloys. The Mg alloy was cut with constant length and width. The AZ80 is the type of Mg alloy used. It has high strength but also have high corrosion ... -
Application of Ag/Zno nanoparticles as photocatalyst for self cleaning fabric
(Universiti Malaysia Perlis (UniMAP), 2017-06)This project is to study the ability of ZnO particles as photocatalyst in self-cleaning fabric and to improve the photocatalytic activity of self-cleaning fabric by doping ZnO with Ag nanoparticles. Both ZnO and Ag/ZnO ... -
Application of response surface methodology for Copper extraction using solid phase immobilized with Cyanex 301
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)A solid phase containing Cyanex 301 was developed by using phase inversion procedure. The extraction of copper ion through this solid phase with the function of pH, weight of the solid phase and temperature were investigated ... -
Bamboo for Copper
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-04)In this research, bamboo was used as ac for Cu (II) removal. Original and adsorbed bamboo was characterized by Scanning Electron Microscopy (SEM) and Fourier Transform Infrared Spectrum (FTIR). The concentration of copper ... -
Banana trunk for zinc (II) removal
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-06)The purpose of this study is to investigate the effectiveness of agro-waste, namely banana trunk fibres act as an adsorbent for zinc ion removal in aqueous solution. The surface morphology and the functional group exist ... -
Basic study on oxidation treatment of rice husk
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)White husk ash suitable for use as reinforcement material for metal matrix composites. This rice husk based reinforcement material are material are prepared by first removing volatile constituent by heating the husks to a ... -
Beneficiation and extraction of Malaysian's iron ores
(Universiti Malaysia Perlis (UniMAP)School of Material Engineering, 2016-06)This present study is to study the influence of the different sizes of iron ore from Bukit Besi, Terengganu and Kulim, Kedah on the reduction process with coke from Perwaja Steel, Kemaman, Terengganu as a reducing agent. ... -
Building of composite system for Wing using Prepreg
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)The effect of fibre reinforcement and resin content on moisture uptake in composite laminate was investigated. Three materials using identical epoxy resin systems but different reinforcements glass, kevlar and carbon ... -
Cathode materials for high energy density rechargeable lithium-ion batteris
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-05)In this project, the Li2MnO3 cathode material is synthesis using solid-state reaction. The characterization is done by using X-ray diffraction (XRD), Scanning electron microscope (SEM) and Thermogravimetric analysis (TGA). ... -
The characterisation of the citronella fiberboards
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-06)As substitution of wood, citronella has a seen as a great potential substitution of wood for manufacturing of fiberboard composite. However, the problem encountered when there is incompatibility between the matrix and the ...