School of Materials Engineering (FYP): Recent submissions
Now showing items 21-40 of 256
-
Preparations of effect of heat treatment on the isothermal oxidation of Fe-33Ni-19Cr
(Universiti Malaysia Perlis (UniMAP), 2017)The effect of heat treatment on the isothermal oxidation of Fe-33Ni-19Cr alloy were investigated at temperature 850°C for 150 hours. The samples of Fe-33Ni-19Cr was given in a square plate shape was undergone heat treatment ... -
The effect of temperature on the nitriding of Aluminium
(Universiti Malaysia Perlis (UniMAP), 2017-06)In this thesis writing, aluminium undergoes nitriding at three different temperatures which is 600°C, 625°C and 650°C. The surface also have been grind and polish with 800, 320 grinder paper and the other variable is rough ... -
Synthesis and characterization of alumina nanoparticles by using a sol gel method
(Universiti Malaysia Perlis (UniMAP), 2017-06)Alumina (Al2O3) nanoparticles were successfully synthesized via sol gel method at different sintering temperature using aluminum nitrate and citric acid with molar ratio 0.5 C/N. The alumina nanoparticles were characterized ... -
Adsorption of heavy metal ions by using magnetite nanoparticles
(Universiti Malaysia Perlis (UniMAP), 2017-06)This thesis outlines the study of an adsorption of heavy metal ions by magnetite nanoparticles. Magnetite nanoparticles were synthesized from five different concentration of ferrous sulfate heptahydrate, FeSO4.7H2O as iron ... -
Effect of ball to powder ratio and media density on fine grinding and mechanical activation of hematite ores in planetary mill
(Universiti Malaysia Perlis (UniMAP), 2017-06)Raw hematite ore from Kulim, Kedah was mechanically activated using physical technique of powder ball milling. Operational parameter during fine grinding of the hematite ore are ball to powder ratio (3:1, 5:1, 7:1), milling ... -
Effects of recycled HDPE/PET blend compositions and compatibilizer employment on the mechanical and thermal
(Universiti Malaysia Perlis (UniMAP), 2017-04)This study is focused on the improvement of mechanical properties of recycles high density polyethylene (rHDPE) and recycles polyethylene terephthalate (rPET) and investigates their thermal properties. The rHDPE/rPET with ... -
Effect of mixing parameter on epoxy composites: mechanical and microscopy analysis
(Universiti Malaysia Perlis (UniMAP), 2017-06)Effect of mixing speed and mixing time on epoxy/nanoclay composites’ mechanical and morphology properties has been studied in this paper. Fixed amount of nanoclay (3phr) was used to mix by 250 rpm and 500 rpm for 1, 2, 2.5 ... -
Synthesis and characterization of biomimetic titanium dioxide
(Universiti Malaysia Perlis (UniMAP), 2017-06)Synthesis of titanium dioxide has become popular nowadays. Biomimetic method has been demonstrated to be very effective ways for synthesizing the titanium dioxide as it low cost and environmental friendly. In this research, ... -
Synthesis and characterization of TiO2 using sol-gel method deposited on porous cordierite for water treatment application
(Universiti Malaysia Perlis (UniMAP), 2017-05)Titanium dioxide (TiO2) which are the most utilized semiconductors in photocatalytic activity was prepared by sol-gel synthesis method and further dip-coating on macroporous cordierite. The excellent immobilization gave ... -
Studies of blends of natural rubber and styrene-butadiene rubber/citronella fibre composite: the effect of physico-mechanical properties and morphology
(Universiti Malaysia Perlis (UniMAP), 2017-06)Rubber composite filled with citronella fibre (CF) was prepared using two roll mill machine. The citronella fibre were undergone alkaline treatment before proceed to compound. Different ratio of filler were prepared with ... -
Development of Al-Ni-Cu amorphous alloy powder
(Universiti Malaysia Perlis (UniMAP), 2017-06)Mechanical alloying (MA) process was used in this research to produce amorphous alloy powder by mixing Al, Ni, Cu powder in the planetary ball mill (pbm) for 8 hours, 16 hours and 24 hours corresponding to the two ... -
Effect of solvent on mechanical properties of Poly(Methyl Methacrylate)/Palm Kernel Shell composites
(Universiti Malaysia Perlis (UniMAP), 2017-06)This project is focused on the effect of solvent on the properties of Poly (Methyl Methacrylate) (PMMA) composites filled with palm kernel shell (PKS). The PMMA/PKS composites with different filler loading were prepared ... -
Synthesis and characterization of ternary glass composition derived by sol-gel method
(Universiti Malaysia Perlis (UniMAP), 2017-04)This study was conducted in order to investigate the effect of different Si/Ca ratio (reduced in CaO content) to the properties of ternary glass (SiO2-CaO-P2O5). The glass powder with Si/Ca ratio of 50:45, 70:25 and 90:5 ... -
Fabrication of Al-based metallic glasses by mechanical alloying and hot consolidation
(Universiti Malaysia Perlis (UniMAP), 2017-04)This project is related to fabrication of aluminium based amorphous metallic glasses. Elemental powder of aluminium, copper and nickel were used for the purposed mentioned. The element powders with nominal composition ... -
Synthesis anodize Al oxide for DNA detection
(Universiti Malaysia Perlis (UniMAP), 2017-04)This research is discuss on the anodized al oxide for DNA detection by using Taguchi method. One step anodizing is carry out in the mixture electrolyte where phosphoric and oxalic acid are used. Fixed parameter in this ... -
Reactions between Iron Oxide and gangue minerals at 1273 K under Ar atmosphere
(Universiti Malaysia Perlis (UniMAP), 2017-06)CO2 discharged from iron and steelmaking companies is an example of the biggest issues for the protection of global environment and sustainable growth of steelmaking industry. One of the ideas to decrease CO2 emission and ... -
Effect of winding angles on the epoxy/kenaf/glass fiber hybrid composite by filament winding process
(Universiti Malaysia Perlis (UniMAP), 2017-06)The study on the effect of winding angle on the mechanical properties of the kenaf/glass fiber epoxy hybrid composite was successfully conducted. In this paper, epoxy matrix, kenaf and glass fiber were selected as the raw ... -
Effects of ultrasonication-assisted homogenization on morphology and properties of thermoplastic starch/cellulose biocomposites
(Universiti Malaysia Perlis (UniMAP), 2017)The thermoplastic starch/cellulose biocomposites were manufactured as green biocomposite films. TPS was produced through plasticization which the mixture of granule starch, water and glycerine went through the heating ... -
The effect of Nickel addition for glass formability of Cu-Ti-Ni amorphous alloy
(Universiti Malaysia Perlis (UniMAP), 2017-05)The Cu50-Ti50 powders were prepared in this project in terms of glass formability and kinetic behaviour with the addition of Ni on different percentages (X= 5%, 10%) by mechanical alloying using planetary ball mill. Before ... -
Synthesis and characterization of glass fiber grade specimen using different source of kaolin
(Universiti Malaysia Perlis (UniMAP), 2017-04)There are many grade of glass that were available in the markets. Different grade of glass can be synthesized by using different sources of raw materials. In this project, glass fiber grade specimen was synthesis using ...