School of Materials Engineering (FYP): Recent submissions
Now showing items 61-80 of 338
-
A study on electroless deposition of nickel onto hydroxyapatite
(Universiti Malaysia Perlis (UniMAP), 2017-04)In this study, it will be focused on the electroless deposition and concentration of nickel onto hydroxyapatite. This project shows the combining of hydroxyapatite and nickel by the difference weight of percentages. The ... -
The effect of Nano-Co-Ha onto sintering temperature
(Universiti Malaysia Perlis (UniMAP), 2017-06)The material use in this project was nano-Co-HA. The materials were prepared by process of electroless deposition and powder metallurgy to produce nano-Co-HA. Nano- Co-HA and HA were compacted by 20 tons shop press into ... -
Mechanical properties of Polyurethane / MWCNTs foam sandwich composites
(Universiti Malaysia Perlis (UniMAP), 2017-06)This study describes the effect of multi-walled carbon nanotubes (MWCNTs) on the properties, particularly modulus properties of rigid polyurethane (PU) foam produced from palm oil polyol (POP) and methylene diphenyl ... -
Ferroelectric material for tuneable microwave application
(Universiti Malaysia Perlis (UniMAP), 2017-04)This project consist of synthesising and characterising BaTiO₃, Ba₀.₆Sr₀.₄TiO₃, and SrTiO₃ as ferroelectric material for tuneable microwave application. ZnO were also prepared and characterised as a comparison to the ... -
Influence of grain size on the isothermal oxidation of Fe-33Ni-19Cr alloy
(Universiti Malaysia Perlis (UniMAP), 2017-06)This research focuses on the influence of grain size on isothermal oxidation of the alloy Fe-19Cr-33Ni. Alloy Fe-19Cr-33Ni have been cut to the desired size and have been grind using a variety of grit sandpaper and weighed ... -
The effect of nickel plating on Mg alloy
(Universiti Malaysia Perlis (UniMAP), 2017-06)Magnesium (Mg) alloys absolutely have potential applications of engineering light materials which recently they have acquired abundant of attention due to their low weights. Weight reduction is strongly demand toward ... -
Structure and property correlation of Ca- and Zr- doped BaTiO₃ for energy harvesting application
(Universiti Malaysia Perlis (UniMAP), 2017-06)RoHS introduced by EU in 2006 urged researches to replaced Pb-based piezoelectric materials in electronic devices. Hence, BaTiO₃ was proposed as a potential candidate to replace lead-based piezoelectric materials. In this ... -
Effect of filler content on mechanical properties of 3D printed conductive ABS–ZnO polymer composites
(Universiti Malaysia Perlis (UniMAP), 2017-04)The aim of this research is to improve the mechanical properties of 3D-printed conductive ABS through addition of ZnO filler and changes in the print settings. ZnO powder was mixed with ABS/acetone solution to reduce ... -
Extraction and characterization of Silica from bamboo leaves using organic acid leaching treatment
(Universiti Malaysia Perlis (UniMAP), 2017-06)Silica is categorized as the valuable inorganic multipurpose chemicals compounds and most abundant material on the earth’s crust. It also can be found in agricultural wastes such as bamboo leaves, rice husk, palm ash, and ... -
Sol-gel synthesis and characterization of ternary bioactive glass with different compositions
(Universiti Malaysia Perlis (UniMAP), 2017-06)In this research, replacement of calcium oxide by phosphate content by different ratios (Ca/P = 37.5:2.5, 35:5, 32.5:7.5) in ternary glass system, SiO₂-CaO-P₂O₅ were synthesised by sol-gel method using tetraethyl orthosilicate ... -
Effect of Calcium Hydroxide addition on mechanical and thermal performance of fly ash geopolymers
(Universiti Malaysia Perlis (UniMAP), 2017-06)In this research, the effect of calcium hydroxide addition on mechanical and thermal performance of fly ash geopolymer is being investigated. Ca(OH)₂ was added in fly ash geopolymer with 0%, 2% and 4% with the various ... -
The effect of additives to the TiO₂ thin film by sol-gel method for solar energy application
(Universiti Malaysia Perlis (UniMAP), 2017-06)This research was study the effect of additives to the TiO₂ thin film by sol-gel method for solar energy application. Titanium dioxide thin films were analysed using Scanning Electron Microscope (SEM), X-ray Diffraction ... -
The influence of co-precipitation and green synthesis of celery, mandarin orange and kiwi fruit on the properties of iron oxide nanoparticles
(Universiti Malaysia Perlis (UniMAP), 2017-06)Iron oxide nanoparticles have unique physical and biological properties. Iron oxide nanoparticles (IONPs) are characterized as materials with a size between 1 to 100 nm. The inclusion of more advanced technologies would ... -
A study of nickel electroplating onto magnesium alloy
(Universiti Malaysia Perlis (UniMAP), 2017-04)Electroplating of nickel onto magnesium alloys surface by using nickel sulphate solution as the electrolyte solution. This study was done to study the effect of different voltages (1V – 5V) used after nickel electroplating ... -
Diffusion of graphitic compound into TiO₂ lattice
(Universiti Malaysia Perlis (UniMAP), 2017-04)In this study diffusion of graphitic compound, GO into TiO₂,rutile lattice has been investigated. First and foremost, anatase powder was being calcined at 750°C for 12 hours in order for phase transition from anatase to ... -
Effect of calcination parameters on the silica phase of bamboo leaves
(Universiti Malaysia Perlis (UniMAP), 2017-04)Silica is known as one of the most abundance elements in the earth’s crust. Silica is used primarily in various industrial application such as in construction industry, ceramic, electronic and etc. The production of silica ... -
Effect of Copper additions on Su-Cu lead free solder alloy
(Universiti Malaysia Perlis (UniMAP), 2017-06)Change towards microstructure and mechanical properties of Sn-Cu solder alloys when the Cu composition was added has been studied. In this research, three copper composition Sn-0.7%Cu, Sn-4%Cu and Sn-10% Cu were used. These ... -
The effect of Alumina and Silica with iron ore on reduction behaviour
(Universiti Malaysia Perlis (UniMAP), 2017-06)The effect of alumina and silica with iron ore on reduction behaviour was investigated at temperature of 900˚C, 1000˚C, 1100˚C and 1200˚C. X-ray diffraction was used to determine the phase transformation of iron ore, ... -
Characterization and mechanical properties of Micron Crystalline Cellulose (MCC) Reinforced Ultra High Molecular Weight Polyethylene (UHMWPE)
(Universiti Malaysia Perlis (UniMAP), 2017-06)Synthesized MCC was investigated using X-ray diffractometer (XRD) and scanning electron microscope (SEM). It was found that the MCC fiber has smooth surface and rod-like shape. The MCC possess semi crystalline structure ... -
Mechanical properties study of metal slag and fly ash mixture as cement replacement in concrete
(Universiti Malaysia Perlis (UniMAP), 2017-04)Concrete is the largest amount of construction material produced in construction industry. The additional of alternative pozzolanic materials for example fly ash and metal slag were introduced as cement replacement in ...